Product Overview
The Aplisens PC-29A / PC-29B Low Voltage Pressure Transmitter is configured per application (pressure range, output signal, process connection, electrical connection/IP rating, and hazardous-area approvals). To ensure proper selection and accurate pricing, please call 865-900-8844 or email KSmith@CPSCalibrations.com for a custom quote.
The Aplisens PC-29A / PC-29B are low voltage pressure transmitters for measurement of pressure, underpressure, and absolute pressure of gases, vapors, and liquids (application dependent). They use a piezoresistive silicon sensor isolated from the process media by a diaphragm and manometric fluid, with housing protection levels ranging from IP65 to IP68 depending on the electrical connection type.
- Wide measuring range: any range from 0…25 mbar up to 0…1000 bar (model/range dependent)
- Low-voltage outputs: PC-29A and PC-29B output variants available (see datasheet)
- Fast response: < 120 ms typical response time (datasheet)
- Intrinsically safe options: ATEX / IECEx versions available (Ex ia variants)
- Multiple housings & connections: different electrical connections and process thread options
Tell us your range, media, temperature, process connection, and any ATEX/IECEx requirements and we’ll quote the correct configuration.
| Feature | Details |
|---|---|
| Models | PC-29A / PC-29B |
| Measuring ranges | 0…25 mbar up to 0…1000 bar (over/under pressure); absolute pressure ranges available (see datasheet) |
| Response time | < 120 ms |
| Thermal compensation | -10…80°C |
| Ambient temperature | -40…80°C |
| Medium temperature | -40…120°C (hot media may require impulse line/siphon) |
| Wetted parts material | 316L stainless steel |
| Housing protection | IP65 to IP68 (depends on electrical connection type) |
| Output (typical options) | PC-29A: 0–5 V or 0.5–4.5 V (8–14 VDC supply) PC-29B: 0–2.5 V (3.3 VDC supply) or 0–3.3 V (4.5 VDC supply) |
Full range limits, overpressure limits, accuracy by range, and ordering codes are in the datasheet.
PC-29 pricing depends on configuration. For a correct quote, we typically confirm:
| What We Need | Examples |
|---|---|
| Model | PC-29A or PC-29B |
| Pressure type | Overpressure / underpressure / absolute |
| Measuring range | Required range + expected overpressure |
| Output signal | 0–5 V, 0.5–4.5 V, 0–2.5 V, or 0–3.3 V |
| Process connection | M20×1.5, G1/2, G1/4, 1/2” NPT, etc. |
| Electrical connection / IP | PD / PZ / PK / PKD / SG / SGM, etc. (IP65–IP68 depending on type) |
| Approvals | ATEX / IECEx intrinsic safety (Ex ia) if required |
| Application conditions | Media, temperature, vibration, ingress requirements |
Call 865-900-8844 or email KSmith@CPSCalibrations.com and we’ll confirm the configuration and send a formal quote.
