Product Overview
Gas detection should not be complicated. The Beacon 110 is gas detection simplified.
The Beacon 110 is a powerful, low-cost fixed system controller for one point of gas detection. It is microprocessor-controlled, versatile, simple to install and operate, and priced to be the industry’s best-value single gas detection controller. It is capable of accepting RKI sensors directly for LEL level combustibles, Oxygen, Hydrogen Sulfide, or Carbon Monoxide. The Beacon 110 can also accept any 4-20 mA transmitter (2 or 3 wire, 24 VDC). Sensors can be mounted directly at the Beacon 110 housing, or can be wired remote from the controller.
The 10 amp rated relays are strong enough to directly power external alarms and horns. The digital display has backlighting and simultaneous readout of the gas type and concentration.
The Beacon 110 is also housed in a NEMA 4X rated case for a weather-tight seal. This case design complies with lock-out/tag-out standards and can be fully secured. An external reset switch allows the alarm to be silenced from outside of the controller housing. The Beacon 110 ships complete with a wall mounting kit for easy installation.
RKI offers the industry’s widest selection of standard and toxic gas detection sensors, which can be utilized with the Beacon 110, providing gas monitoring protection for almost any application.
Related Services
- Design, Consultations, and Engineering
- Installation
- Start-up
- Training
- System Maintenance
Please contact CPS Calibrations at 865-900-8844 or SFarmer@cpscalibrations.com for more information.
| Category | Details |
|---|---|
| Physical Dimensions | Height: 8.5″ (216 mm), Width: 7.0″ (178 mm), Depth: 4.3″ (109 mm) |
| Enclosure | Wall mounting grey polycarbonate with hinged cover |
| Conduit Connection | 3/4″ NPT conduit hubs (2 provided): 1 for sensor wiring, 1 for power & relay wiring |
| Wiring Termination | Screw type terminal block (14 gauge max) |
| Power | Universal 115 VAC & 220 VAC, or 24 VDC nominal, battery backup option available |
| Controls | 3 internal push buttons for setup, programming, and calibration; 1 external push button for alarm reset |
| Operating Temperature | -4°F to 122°F (-20°C to 50°C) |
| Storage Temperature | -4°F to 158°F (-20°C to 70°C) |
| Relative Humidity | 0 – 95% RH |
| Enclosure Rating | NEMA-4X (waterproof, chemical, and weather resistant) |
| Inputs | LEL, Oxygen, Carbon Monoxide, Hydrogen Sulfide; 4-20 mA Sensors with wiring distances up to 5000 feet |
| Outputs | 3 relays (10 amp rating at 115 VAC); 4-20 mA signal output; 24 VDC (400 mA max) |
| Display | 2 x 8 Alphanumeric display with backlighting |
| Audible Alarm | Built-in 94 dB alarm, pulsing for gas alarm, steady for fail |
| Warranty | One year materials and workmanship |
| Partial List of Detectable Gases | Ammonia (NH3), Arsine (AsH3), Boron Trichloride (BCl3), Carbon Dioxide (CO2), Carbon Monoxide (CO), Chlorine (Cl2), Chlorine Dioxide (ClO2), and more. Contact CPS Calibrations for a full list at 865-900-8844. |
