RKI PS 2 Combustible Single Point Stand Alone Monitor

RKI Instruments

Write a Review
MSRP: $450.00
$436.50
(You save $13.50 )
SKU:
73-1020RK-01
Adding to cart… The item has been added

Product Overview

A perfect low-cost solution for hydrogen detection in battery rooms, or for LEL or PPM level detection of a variety of flammable or solvent vapors in general industry.

The Model PS 2 is a multipurpose gas monitor utilizing a MOS (metal oxide sensor) for long-lasting and low-maintenance detection at the LEL or PPM levels of many gases or vapors. The PS 2 has two alarm levels for increasing gas or vapor levels, at the PPM level for detection of many solvent vapors, or for LEL level detection of flammable vapors. Inquire at the factory for your specific requirement. Each alarm level activates a 12-amp relay inside the unit, and terminals are provided for wiring the relay to activate an external alarming device or some other device such as a ventilation fan.

This standalone unit is housed in a durable plastic enclosure with flanges provided for wall mounting and is designed with easy-access wiring hubs on the bottom of the unit. The front of the PS 2 contains three lights; Pilot, Alarm 1, and Alarm 2. An internal audible alarm (85 db) is also built-in which activates in a gas alarm condition.

The standard PS 2 is supplied with the gas sensor located on the end of a 30-foot cable (other cable distances are also available). Each unit is powered by 115 VAC standard or 24 VDC as standard (48 VDC versions optional), and the AC version comes complete with a 6′ power cord.

Related Services

  • Design, Consultations, and Engineering
  • Installation
  • Start-up
  • Training
  • System Maintenance

Please contact CPS Calibrations at 865-900-8844 or SFarmer@cpscalibrations.com for more information.

Model PS 2 Specifications

Category Details
Physical Dimensions Height: 6.85” (174 mm), Width: 6.48” (165 mm), Depth: 3.30” (84 mm)
Enclosure ABS plastic, indoor housing
Operating Temperature 35°F to 120°F (2°C to 49°C)
Sensor Types Metal Oxide (MOS / Semiconductor type)
Measuring Ranges LEL or PPM levels available for many gases
Outputs Relays: 12 amps for each alarm, Audible: 85 dB, Visual: Alarm 1 (Orange LED), Alarm 2 (Red LED)
Power 115 VAC or 24 VDC (48 VDC optional)
Warranty One year materials and workmanship

Partial List of Detectable Gases

Gas Chemical Formula
Ethyl Alcohol C2H5OH
Gasoline CnHm
Hexane C6H14
Hydrogen H2
Iso-Butane i-C4H10
Isopropyl Alcohol (CH3)2CHOH
Methane CH4
Methylene Chloride CH2Cl2
Perchloroethylene CCl2CCl2
Toluene C7H8
Trichloroethane ClCH2CHCl2
Xylene C6H4(CH3)2

Warranty Information

Warranty One year materials and workmanship.