Product Overview
The SDM-6000 is a versatile maintenance tool that automates the service of a GX-6000 portable gas monitor. This docking station can be used as a stand-alone device for charging, calibration, and bump testing, with all records stored automatically for future upload to a PC via SD card (PC software and SD card included).
Modular Design
SDM-6000 calibration stations are modular by design and can easily connect to each other without the need of any tubes or cables. One power source and one set of calibration equipment can provide service for up to 10 SDM-6000 calibration stations.
Up to 10 calibration stations can also be connected to one PC for automated charging, calibration, bump testing, and archiving of data. Even if instruments are turned off, automated routines will power up the instruments and run as scheduled. All data collected from the PC Controlled software can also be centralized in one network location accessible by anyone with the PC Controlled software with access to the network location.
| Feature | Details |
|---|---|
| Display | Touch panel TFT liquid crystal (3.5 inch, 320×240 image element QVGA, RGB1677 million colors) Backlight |
| LED | 3 colors [Green, Red, Orange]. Each status is indicated by Lighting / Blinking |
| BUMP Test | Standard settings: AIR Flush time: 15sec, GAS time: 20sec, AIR Purge time: 5sec Threshold value: ±50%, Auto Calibration: OFF, Auto alarm function check: ON Auto print: OFF |
| Calibration | Standard settings: AIR Flush time: 30sec, GAS time: 90sec, AIR Purge time: 30sec Auto alarm function check: ON, Auto print: OFF |
| Power (AC Adaptor) | 100~240VAC~50/60Hz |
| Dimensions, Weight | 5.11”(W) x 13’(H) x 7.2”(D), Approx. 3.7lb |
| Operation Temperature, Humidity | 0~104°F, below 95~RH (no condensing) |
| Certification | CE marking |
