Description
The CPS Calibrations 3-Gas Calibration Gas – CO 50 ppm / CH₄ 1.62% (32% LEL) / O₂ 17.0% is a precision calibration gas mixture designed for the calibration and bump testing of compatible portable and fixed gas detection instruments.
This mixture contains 50 ppm Carbon Monoxide (CO), 1.62% (32% LEL) Methane (CH₄), and 17.0% Oxygen (O₂), with Nitrogen (N₂) balance.
Available in the following cylinder sizes:
- 11L Aluminum Cylinder: Trigger valve
- 34L Aluminum Cylinder: C-10 connection
- 44L Aluminum Cylinder: C-10 connection
- 60L Aluminum Cylinder: C-10 connection
- 66L Aluminum Cylinder: C-10 connection
- 120L Aluminum Cylinder: C-10 connection
Please verify your required cylinder size and regulator connection before ordering.
11 Liter Minimum Order: The 11 Liter cylinder must be ordered in a minimum quantity of 6 cylinders.
Each cylinder includes a QR code for convenient access from a smartphone or other compatible device to the cylinder-specific Safety Data Sheet (SDS) and Certificate of Analysis (COA).
This calibration gas is NIST traceable and produced under quality systems supporting ISO 17034:2016 – Reference Material Production, ISO/IEC 17025:2017 – Chemical Testing, and ISO 9001:2015 – Quality Management.
Carbon Monoxide (CO): 50 ppm
Methane (CH₄): 1.62% (32% LEL)
Oxygen (O₂): 17.0%
Balance Gas: Nitrogen (N₂)
Cylinder Sizes: 11L, 34L, 44L, 60L, 66L & 120L
Shelf Life: 48 Months
Traceability: NIST Traceable
Documentation: Cylinder-Specific SDS & COA via QR Code
Country of Manufacture: USA
Need help confirming the correct calibration gas for your detector?
Call CPS Calibrations at 865-900-8844 or email info@cpscalibrations.com.
| Carbon Monoxide (CO) | 50 ppm |
| Methane (CH₄) | 1.62% (32% LEL) |
| Oxygen (O₂) | 17.0% Vol. |
| Balance Gas | Nitrogen (N₂) |
| Available Cylinder Sizes | 11L, 34L, 44L, 60L, 66L & 120L |
| 11L Cylinder Valve | Trigger valve (minimum order of 6) |
| 34L Aluminum Connection | C-10 |
| 44L Aluminum Connection | C-10 |
| 60L Aluminum Connection | C-10 |
| 66L Aluminum Connection | C-10 |
| 120L Aluminum Connection | C-10 |
| Shelf Life | 48 Months |
| Traceability | NIST Traceable |
| Reference Material Production | ISO 17034:2016 |
| Chemical Testing | ISO/IEC 17025:2017 |
| Quality Management | ISO 9001:2015 |
| Documentation | Cylinder-Specific SDS & Certificate of Analysis (COA) Accessible via QR Code |
| Country of Manufacture | USA |
Common Uses
- Calibration of compatible multi-gas gas detectors
- Bump testing and functional verification
- Portable gas detection equipment
- Fixed multi-gas gas detection systems
- Industrial safety and maintenance programs
Always verify the required calibration gas concentration, regulator, flow rate, and calibration procedure specified by the gas detector manufacturer before use.
Processing Time: Please allow approximately 3 business days for order processing prior to shipment. Lead times may vary depending on availability and order quantity.
Hazardous Material Shipping: Calibration gas cylinders are regulated for transportation as hazardous materials and must be shipped in accordance with applicable carrier and hazardous-material regulations. Available shipping methods and charges may vary based on cylinder size, quantity, destination, and applicable HazMat requirements.
Non-Returnable: Calibration gas cylinders are non-returnable. Please verify the gas concentration, cylinder size, and connection before placing your order.
Related Products
Related Products
3-Gas Calibration Gas – CO 50 ppm / CH₄ 1.62% (32% LEL) / O₂ 18.0%
Calibration Gas
3-Gas Calibration Gas – CO 100 ppm / CH₄ 2.5% (50% LEL) / O₂ 17.0%
Calibration Gas
3-Gas Calibration Gas – CO 50 ppm / CH₄ 2.5% (50% LEL) / O₂ 20.9%
Calibration Gas
3-Gas Calibration Gas – CO 50 ppm / CH₄ 2.5% (50% LEL) / O₂ 19.0%
Calibration Gas
3-Gas Calibration Gas – CO 50 ppm / CH₄ 2.5% (50% LEL) / O₂ 12.0%
Calibration Gas