Calibration Gas Guide
What Calibration Gas Does My Detector Need?
Find your detector below — or search by manufacturer, model, unit part number, sensor, or sensor part number. Every unit shows the standard calibration gas it takes, with our part numbers and prices, and every other sensor that fits it with the gas that sensor calibrates to. Values are taken from each manufacturer's own published documentation; where a manufacturer publishes no value, the page says so instead of guessing.
No match — check the part number, or call us at (865) 900-8844 and we'll match the gas to your instrument.
RKI Instruments
Unit part numbers: 73-0065
| Sensor | Calibrates to |
|---|---|
| CO | Carbon monoxide 50 ppm |
Source: brand-standard (RKI mix 116)
Other sensors that fit this unit
| Sensor | Sensor part # | Calibrates to | |
|---|---|---|---|
| CO (0-2,000 ppm) | ESR-A13P-CO · ESR-A1CP-CO-H | Carbon monoxide 50 ppm | 34L · 34-10-0050 · $74 |
Unit part numbers: 73-0067
| Sensor | Calibrates to |
|---|---|
| CO | Carbon monoxide 50 ppm |
Source: brand-standard (RKI mix 116)
Other sensors that fit this unit
| Sensor | Sensor part # | Calibrates to | |
|---|---|---|---|
| CO (0-2,000 ppm) | ESR-A13P-CO · ESR-A1CP-CO-H | Carbon monoxide 50 ppm | 34L · 34-10-0050 · $74 |
Unit part numbers: 73-0069
| Sensor | Calibrates to |
|---|---|
| CO | Carbon monoxide 50 ppm |
| O2 | Oxygen 20.9% (zero air) — span |
Source: brand-standard (RKI mix 116) · universal
Unit part numbers: 72-0012, 72-0012-01, 73-0022, 73-0022-01, 73-0023, 73-0023-01 · +4 more (search any part number)
| Sensor | Calibrates to |
|---|---|
| CO | Carbon monoxide 50 ppm |
| H2S | Hydrogen sulfide 25 ppm |
| O2 | Oxygen 20.9% (zero air) — span |
| CO/O2 | No manufacturer default published — match the concentration set in the instrument. |
Source: brand-standard (RKI mix 116) · universal · unresolved
Other sensors that fit this unit
| Sensor | Sensor part # | Calibrates to | |
|---|---|---|---|
| CO (0-2,000 ppm) | ESR-A13P-CO · ESR-A1CP-CO-H | Carbon monoxide 50 ppm | 34L · 34-10-0050 · $74 |
| CO/H2S (0-2,000 / 0-200 ppm) | ESR-A1DP-COHS | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| CO/O2 (0-300 ppm / 0-25% Volume) | ESR-X1DP-CX | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| H2S (0-200 ppm) | ESR-A13I-H2S | Hydrogen sulfide 25 ppm | 11L · FX11-111-025 · $55 |
| O2 (0-25% Volume) | OS-BM2 | Oxygen 20.9% (zero air) — span; Nitrogen 99.999% UHP — zero Not stocked as a standalone cylinder — ask us. |
Unit part numbers: 72-0037, 72-0037-05, 72-0037-50
| Sensor | Calibrates to |
|---|---|
| LEL | Methane 50% LEL |
Source: brand-standard (RKI mix 116)
Other sensors that fit this unit
| Sensor | Sensor part # | Calibrates to | |
|---|---|---|---|
| LEL (0-100% LEL) | NC-6264A | Methane 50% LEL | 34L · 34-23-8600 · $70 |
Unit part numbers: 72-RA-C, 72-RA-D, 72-RA-E, 72-RA-F, 72-RA-G
| Sensor | Calibrates to |
|---|---|
| LEL | Methane 50% LEL |
| O2 | Oxygen 12% |
| CO | Carbon monoxide 50 ppm |
| H2S | Hydrogen sulfide 25 ppm |
Source: GX-3R Operator's Manual 71-0477 Rev F, rkiinstruments.com (factory Cylinder A defaults)
Standard calibration gas for this unit
4-Gas Calibration Gas – RKI Equivalent – H₂S 25 / CO 50 / CH₄ 50% LEL / O₂ 12%Other sensors that fit this unit
| Sensor | Sensor part # | Calibrates to | |
|---|---|---|---|
| CO (0-2,000 ppm) | ESR-A13P-CO · ESR-A1CP-CO-H | Carbon monoxide 50 ppm | 34L · 34-10-0050 · $74 |
| CO/H2S (0-2,000 / 0-200 ppm) | ESR-A1DP-COHS | Carbon monoxide 50 ppm + Hydrogen sulfide 25 ppm (via standard mix) | 34L · FX34-150-1500 · $195 |
| H2S (0-200 ppm) | ESR-A13I-H2S | Hydrogen sulfide 25 ppm | 11L · FX11-111-025 · $55 |
| LEL (0-100% LEL) | NCR-6309 | Methane 50% LEL | 34L · 34-23-8600 · $70 |
| O2 (0-25% Volume) | ESR-X13P-OXY | Oxygen 20.9% (zero air) — span; Nitrogen 99.999% UHP — zero Not stocked as a standalone cylinder — ask us. |
Unit part numbers: 72-PAX-B, 72-PAX-C, 72-PAX-D, 72-PAX-F, 72-PAA-B, 72-PAA-C · +26 more (search any part number)
| Sensor | Calibrates to |
|---|---|
| LEL | Methane 50% LEL |
| O2 | Oxygen 12% |
| CO | Carbon monoxide 50 ppm |
| H2S | Hydrogen sulfide 25 ppm |
Source: GX-3R Pro Operator's Manual 71-0478 Rev H, rkiinstruments.com (factory Cylinder A defaults)
Standard calibration gas for this unit
4-Gas Calibration Gas – RKI Equivalent – H₂S 25 / CO 50 / CH₄ 50% LEL / O₂ 12%Other sensors that fit this unit
| Sensor | Sensor part # | Calibrates to | |
|---|---|---|---|
| CO (0-2,000 ppm) | ESR-A13P-CO · ESR-A1CP-CO-H | Carbon monoxide 50 ppm | 34L · 34-10-0050 · $74 |
| CO/H2S (0-2,000 / 0-200 ppm) | ESR-A1DP-COHS | Carbon monoxide 50 ppm + Hydrogen sulfide 25 ppm (via standard mix) | 34L · FX34-150-1500 · $195 |
| CO2 (0-10% Volume) | IRR-0409 | Match the concentration stored in the device — ask us and we'll match a cylinder to it. RKI publishes no default span for this sensor (the manual gives calibration-concentration ranges only) — match the concentration set in the instrument. CPS stocked gas is linked as an option, not as an RKI default. | |
| CO2 (0-10,000 ppm) | IRR-0433 | Carbon dioxide 5,000 ppm RKI publishes no default span for this sensor (the manual gives calibration-concentration ranges only) — match the concentration set in the instrument. CPS stocked gas is linked as an option, not as an RKI default. | 34L · 34-08-3300 · $70 |
| H2S (0-200 ppm) | ESR-A13I-H2S | Hydrogen sulfide 25 ppm | 11L · FX11-111-025 · $55 |
| HCN (0-30 ppm) | ESR-A13D-HCN | Hydrogen cyanide 10 ppm RKI publishes no default span for this sensor (the manual gives calibration-concentration ranges only) — match the concentration set in the instrument. CPS stocked gas is linked as an option, not as an RKI default. | 34L · FX34-108-010 · $254 |
| LEL (0-100% LEL) | NCR-6309 | Methane 50% LEL | 34L · 34-23-8600 · $70 |
| NH3 (0-400 ppm) | ESR-B134-NH3 | Ammonia 25 ppm RKI publishes no default span for this sensor (the manual gives calibration-concentration ranges only) — match the concentration set in the instrument. CPS stocked gas is linked as an option, not as an RKI default. | 34L · FX34-106-025 · $239 |
| NO2 (0-20 ppm) | ESR-A13D-NO2 | Nitrogen dioxide 10 ppm RKI publishes no default span for this sensor (the manual gives calibration-concentration ranges only) — match the concentration set in the instrument. CPS stocked gas is linked as an option, not as an RKI default. | 34L · FX34-123-010 · $239 |
| O2 (0-25% Volume) | ESR-X13P-OXY | Oxygen 20.9% (zero air) — span; Nitrogen 99.999% UHP — zero Not stocked as a standalone cylinder — ask us. | |
| PH3 (0-20 ppm) | ESR-A13D-PH3 | Phosphine 5 ppm RKI publishes no default span for this sensor (the manual gives calibration-concentration ranges only) — match the concentration set in the instrument. CPS stocked gas is linked as an option, not as an RKI default. | 34L · FX34-124-05 · $244 |
| SO2 (0-100 ppm) | ESR-A13D-SO2 | Sulfur dioxide 10 ppm RKI publishes no default span for this sensor (the manual gives calibration-concentration ranges only) — match the concentration set in the instrument. CPS stocked gas is linked as an option, not as an RKI default. | 34L · FX34-126-010 · $163 |
Unit part numbers: 72-6AXX-C, 72-6AXC-C, 72-6AXD-C, 72-6AXE-C, 72-6AXF-C, 72-6AXI-C · +30 more (search any part number)
| Sensor | Calibrates to |
|---|---|
| LEL | Methane 50% LEL |
| O2 | Oxygen 12% |
| CO | Carbon monoxide 50 ppm |
| H2S | Hydrogen sulfide 25 ppm |
| PID | Isobutylene 100 ppm |
Source: GX-6000 Operator's Manual 71-0362 Rev W, rkiinstruments.com
Standard calibration gas for this unit
4-Gas Calibration Gas – RKI Equivalent – H₂S 25 / CO 50 / CH₄ 50% LEL / O₂ 12%Also standard for this unit (5-gas configuration)
5-Gas Calibration Gas – RKI Equivalent – H₂S 25 / CO 50 / CH₄ 50% LEL / O₂ 12% / Isobutylene 100 ppmOther sensors that fit this unit
| Sensor | Sensor part # | Calibrates to | |
|---|---|---|---|
| CO (0-500 ppm) | ES-1821 | Carbon monoxide 50 ppm | 34L · 34-10-0050 · $74 |
| CO2 (0-10% Volume) | DES-3311-1 · DES-3311-1-01 | Match the concentration stored in the device — ask us and we'll match a cylinder to it. RKI publishes no default span for this sensor (the manual gives calibration-concentration ranges only) — match the concentration set in the instrument. CPS stocked gas is linked as an option, not as an RKI default. | |
| CO2 (0-10,000 ppm) | DES-3311-4 · DES-3311-4-01 | Carbon dioxide 5,000 ppm RKI publishes no default span for this sensor (the manual gives calibration-concentration ranges only) — match the concentration set in the instrument. CPS stocked gas is linked as an option, not as an RKI default. | 34L · 34-08-3300 · $70 |
| Cl2 (0-10 ppm) | ESS-B335-CL2 | Chlorine 10 ppm | 34L · FX34-130-10 · $239 |
| H2S (0-100 ppm) | ES-1827i | Hydrogen sulfide 25 ppm | 11L · FX11-111-025 · $55 |
| HC (0-100% LEL / 0-30% Volume) | DES-3311-2 | Methane 50% LEL | 34L · 34-23-8600 · $70 |
| HCN (0-15 ppm) | ESS-03DH-HCN | Hydrogen cyanide 10 ppm RKI publishes no default span for this sensor (the manual gives calibration-concentration ranges only) — match the concentration set in the instrument. CPS stocked gas is linked as an option, not as an RKI default. | 34L · FX34-108-010 · $254 |
| LEL (0-100% LEL) | NC-6264A · NC-6264AZX | Methane 50% LEL | 34L · 34-23-8600 · $70 |
| LEL (0-100% LEL / 0-100% Volume) | DES-3311-3 | Methane 50% LEL | 34L · 34-23-8600 · $70 |
| NH3 (0-400 ppm) | ESS-B332-NH3 | Ammonia 25 ppm RKI publishes no default span for this sensor (the manual gives calibration-concentration ranges only) — match the concentration set in the instrument. CPS stocked gas is linked as an option, not as an RKI default. | 34L · FX34-106-025 · $239 |
| NO2 (0-20 ppm) | ESS-03DH-NO2 | Nitrogen dioxide 10 ppm RKI publishes no default span for this sensor (the manual gives calibration-concentration ranges only) — match the concentration set in the instrument. CPS stocked gas is linked as an option, not as an RKI default. | 34L · FX34-123-010 · $239 |
| O2 (0-25% Volume) | OS-BM2 | Oxygen 20.9% (zero air) — span; Nitrogen 99.999% UHP — zero Not stocked as a standalone cylinder — ask us. | |
| PH3 (0-20 ppm) | ESS-03DH-PH3 | Phosphine 5 ppm RKI publishes no default span for this sensor (the manual gives calibration-concentration ranges only) — match the concentration set in the instrument. CPS stocked gas is linked as an option, not as an RKI default. | 34L · FX34-124-05 · $244 |
| PID (0-1,000 ppm) | PID-004 | Isobutylene 100 ppm | 34L · 34-21-0100 · $74 |
| PID (0-100 ppm) | PID-003L | Isobutylene 100 ppm | 34L · 34-21-0100 · $74 |
| PID (0-4,000 ppm) | PID-002LA | Isobutylene 100 ppm | 34L · 34-21-0100 · $74 |
| PID (0-40 ppm) | PID-001LA | Isobutylene 100 ppm | 34L · 34-21-0100 · $74 |
| SO2 (0-100 ppm) | ESS-03DH-SO2 | Sulfur dioxide 10 ppm RKI publishes no default span for this sensor (the manual gives calibration-concentration ranges only) — match the concentration set in the instrument. CPS stocked gas is linked as an option, not as an RKI default. | 34L · FX34-126-010 · $163 |
Unit part numbers: 72-61AXXX-B, 72-61AXXX-C, 72-61AXXT-B, 72-61AXXT-C, 72-61AXEX-B, 72-61AXEX-C · +282 more (search any part number)
| Sensor | Calibrates to |
|---|---|
| LEL | Methane 50% LEL |
| O2 | Oxygen 12% |
| CO | Carbon monoxide 50 ppm |
| H2S | Hydrogen sulfide 25 ppm |
| PID | Isobutylene 100 ppm |
Source: GX-6000 Operator's Manual 71-0362 Rev W, rkiinstruments.com
Standard calibration gas for this unit
4-Gas Calibration Gas – RKI Equivalent – H₂S 25 / CO 50 / CH₄ 50% LEL / O₂ 12%Also standard for this unit (5-gas configuration)
5-Gas Calibration Gas – RKI Equivalent – H₂S 25 / CO 50 / CH₄ 50% LEL / O₂ 12% / Isobutylene 100 ppmOther sensors that fit this unit
| Sensor | Sensor part # | Calibrates to | |
|---|---|---|---|
| CO (0-2,000 ppm) | ESR-A13P-CO · ESR-A1CP-CO-H | Carbon monoxide 50 ppm | 34L · 34-10-0050 · $74 |
| CO2 (0-10% Volume) | DES-3311-1 · DES-3311-1-01 | Match the concentration stored in the device — ask us and we'll match a cylinder to it. RKI publishes no default span for this sensor (the manual gives calibration-concentration ranges only) — match the concentration set in the instrument. CPS stocked gas is linked as an option, not as an RKI default. | |
| CO2 (0-10,000 ppm) | DES-3311-4 · DES-3311-4-01 | Carbon dioxide 5,000 ppm RKI publishes no default span for this sensor (the manual gives calibration-concentration ranges only) — match the concentration set in the instrument. CPS stocked gas is linked as an option, not as an RKI default. | 34L · 34-08-3300 · $70 |
| Cl2 (0-10 ppm) | ESS-B335-CL2 | Chlorine 10 ppm | 34L · FX34-130-10 · $239 |
| H2S (0-200 ppm) | ESR-A13I-H2S | Hydrogen sulfide 25 ppm | 11L · FX11-111-025 · $55 |
| HC (0-100% LEL / 0-30% Volume) | DES-3311-2 | Methane 50% LEL | 34L · 34-23-8600 · $70 |
| HCN (0-15 ppm) | ESS-03DH-HCN | Hydrogen cyanide 10 ppm RKI publishes no default span for this sensor (the manual gives calibration-concentration ranges only) — match the concentration set in the instrument. CPS stocked gas is linked as an option, not as an RKI default. | 34L · FX34-108-010 · $254 |
| LEL (0-100% LEL / 0-100% Volume) | DES-3311-3 | Methane 50% LEL | 34L · 34-23-8600 · $70 |
| LEL (0-100% Volume) | TE-7561 | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| NH3 (0-400 ppm) | ESS-B332-NH3 | Ammonia 25 ppm RKI publishes no default span for this sensor (the manual gives calibration-concentration ranges only) — match the concentration set in the instrument. CPS stocked gas is linked as an option, not as an RKI default. | 34L · FX34-106-025 · $239 |
| NO2 (0-20 ppm) | ESS-03DH-NO2 | Nitrogen dioxide 10 ppm RKI publishes no default span for this sensor (the manual gives calibration-concentration ranges only) — match the concentration set in the instrument. CPS stocked gas is linked as an option, not as an RKI default. | 34L · FX34-123-010 · $239 |
| O2 (0-25% Volume) | ESR-X13P-OXY | Oxygen 20.9% (zero air) — span; Nitrogen 99.999% UHP — zero Not stocked as a standalone cylinder — ask us. | |
| PH3 (0-20 ppm) | ESS-03DH-PH3 | Phosphine 5 ppm RKI publishes no default span for this sensor (the manual gives calibration-concentration ranges only) — match the concentration set in the instrument. CPS stocked gas is linked as an option, not as an RKI default. | 34L · FX34-124-05 · $244 |
| PID (0-1,000 ppm) | PID-004 | Isobutylene 100 ppm | 34L · 34-21-0100 · $74 |
| PID (0-100 ppm) | PID-003L | Isobutylene 100 ppm | 34L · 34-21-0100 · $74 |
| PID (0-4,000 ppm) | PID-002LA | Isobutylene 100 ppm | 34L · 34-21-0100 · $74 |
| PID (0-40 ppm) | PID-001LA | Isobutylene 100 ppm | 34L · 34-21-0100 · $74 |
| SO2 (0-100 ppm) | ESS-03DH-SO2 | Sulfur dioxide 10 ppm RKI publishes no default span for this sensor (the manual gives calibration-concentration ranges only) — match the concentration set in the instrument. CPS stocked gas is linked as an option, not as an RKI default. | 34L · FX34-126-010 · $163 |
Unit part numbers: 72-FA-A-B, 72-FA-A-A20, 72-FA-A-A15, 72-FA-A-A10, 72-FA-A-A5, 72-FA-B-B · +9 more (search any part number)
| Sensor | Calibrates to |
|---|---|
| LEL | Methane 50% LEL |
| O2 | Oxygen 12% |
| CO | Carbon monoxide 50 ppm |
| H2S | Hydrogen sulfide 25 ppm |
Standard calibration gas for this unit
4-Gas Calibration Gas – RKI Equivalent – H₂S 25 / CO 50 / CH₄ 50% LEL / O₂ 12%Other sensors that fit this unit
| Sensor | Sensor part # | Calibrates to | |
|---|---|---|---|
| CO (0-2,000 ppm) | ESR-A13P-CO · ESR-A1CP-CO-H | Carbon monoxide 50 ppm | 34L · 34-10-0050 · $74 |
| CO/H2S (0-2,000 / 0-200 ppm) | ESR-A1DP-COHS | Carbon monoxide 50 ppm + Hydrogen sulfide 25 ppm (via standard mix) | 34L · FX34-150-1500 · $195 |
| H2S (0-200 ppm) | ESR-A13I-H2S | Hydrogen sulfide 25 ppm | 11L · FX11-111-025 · $55 |
| LEL (0-100% LEL) | NCR-6309 | Methane 50% LEL | 34L · 34-23-8600 · $70 |
| O2 (0-25% Volume) | ESR-X13P-OXY | Oxygen 20.9% (zero air) — span; Nitrogen 99.999% UHP — zero Not stocked as a standalone cylinder — ask us. |
Unit part numbers: 73-0063
| Sensor | Calibrates to |
|---|---|
| H2S | Hydrogen sulfide 25 ppm |
Source: brand-standard (RKI mix 116)
Other sensors that fit this unit
| Sensor | Sensor part # | Calibrates to | |
|---|---|---|---|
| H2S (0-200 ppm) | ESR-A13I-H2S | Hydrogen sulfide 25 ppm | 11L · FX11-111-025 · $55 |
Unit part numbers: 72-0018
| Sensor | Calibrates to |
|---|---|
| O2 | Oxygen 20.9% (zero air) — span |
Source: universal
Unit part numbers: 73-0075
| Sensor | Calibrates to |
|---|---|
| Cl2 | Chlorine 10 ppm |
Source: standard-target
Other sensors that fit this unit
| Sensor | Sensor part # | Calibrates to | |
|---|---|---|---|
| Cl2 (0-20 ppm) | ESR-B136-CL2 | Chlorine 10 ppm | 34L · FX34-130-10 · $239 |
| HCN (0-30 ppm) | ESR-A13D-HCN | Hydrogen cyanide 10 ppm | 34L · FX34-108-010 · $254 |
| NH3 (0-400 ppm) | ESR-B134-NH3 | Ammonia 25 ppm | 34L · FX34-106-025 · $239 |
| NO2 (0-20 ppm) | ESR-A13D-NO2 | Nitrogen dioxide 10 ppm | 34L · FX34-123-010 · $239 |
| PH3 (0-20 ppm) | ESR-A13D-PH3 | Phosphine 5 ppm | 34L · FX34-124-05 · $244 |
| SO2 (0-100 ppm) | ESR-A13D-SO2 | Sulfur dioxide 10 ppm | 34L · FX34-126-010 · $163 |
Unit part numbers: 73-0071
| Sensor | Calibrates to |
|---|---|
| HCN | Hydrogen cyanide 10 ppm |
Source: standard-target
Other sensors that fit this unit
| Sensor | Sensor part # | Calibrates to | |
|---|---|---|---|
| Cl2 (0-20 ppm) | ESR-B136-CL2 | Chlorine 10 ppm | 34L · FX34-130-10 · $239 |
| HCN (0-30 ppm) | ESR-A13D-HCN | Hydrogen cyanide 10 ppm | 34L · FX34-108-010 · $254 |
| NH3 (0-400 ppm) | ESR-B134-NH3 | Ammonia 25 ppm | 34L · FX34-106-025 · $239 |
| NO2 (0-20 ppm) | ESR-A13D-NO2 | Nitrogen dioxide 10 ppm | 34L · FX34-123-010 · $239 |
| PH3 (0-20 ppm) | ESR-A13D-PH3 | Phosphine 5 ppm | 34L · FX34-124-05 · $244 |
| SO2 (0-100 ppm) | ESR-A13D-SO2 | Sulfur dioxide 10 ppm | 34L · FX34-126-010 · $163 |
Unit part numbers: 73-0077
| Sensor | Calibrates to |
|---|---|
| NH3 | Ammonia 25 ppm |
Source: standard-target
Other sensors that fit this unit
| Sensor | Sensor part # | Calibrates to | |
|---|---|---|---|
| Cl2 (0-20 ppm) | ESR-B136-CL2 | Chlorine 10 ppm | 34L · FX34-130-10 · $239 |
| HCN (0-30 ppm) | ESR-A13D-HCN | Hydrogen cyanide 10 ppm | 34L · FX34-108-010 · $254 |
| NH3 (0-400 ppm) | ESR-B134-NH3 | Ammonia 25 ppm | 34L · FX34-106-025 · $239 |
| NO2 (0-20 ppm) | ESR-A13D-NO2 | Nitrogen dioxide 10 ppm | 34L · FX34-123-010 · $239 |
| PH3 (0-20 ppm) | ESR-A13D-PH3 | Phosphine 5 ppm | 34L · FX34-124-05 · $244 |
| SO2 (0-100 ppm) | ESR-A13D-SO2 | Sulfur dioxide 10 ppm | 34L · FX34-126-010 · $163 |
Unit part numbers: 73-0073
| Sensor | Calibrates to |
|---|---|
| NO2 | Nitrogen dioxide 10 ppm |
Source: standard-target
Other sensors that fit this unit
| Sensor | Sensor part # | Calibrates to | |
|---|---|---|---|
| Cl2 (0-20 ppm) | ESR-B136-CL2 | Chlorine 10 ppm | 34L · FX34-130-10 · $239 |
| HCN (0-30 ppm) | ESR-A13D-HCN | Hydrogen cyanide 10 ppm | 34L · FX34-108-010 · $254 |
| NH3 (0-400 ppm) | ESR-B134-NH3 | Ammonia 25 ppm | 34L · FX34-106-025 · $239 |
| NO2 (0-20 ppm) | ESR-A13D-NO2 | Nitrogen dioxide 10 ppm | 34L · FX34-123-010 · $239 |
| PH3 (0-20 ppm) | ESR-A13D-PH3 | Phosphine 5 ppm | 34L · FX34-124-05 · $244 |
| SO2 (0-100 ppm) | ESR-A13D-SO2 | Sulfur dioxide 10 ppm | 34L · FX34-126-010 · $163 |
Unit part numbers: 73-0079
| Sensor | Calibrates to |
|---|---|
| PH3 | Phosphine 5 ppm |
Source: standard-target
Other sensors that fit this unit
| Sensor | Sensor part # | Calibrates to | |
|---|---|---|---|
| Cl2 (0-20 ppm) | ESR-B136-CL2 | Chlorine 10 ppm | 34L · FX34-130-10 · $239 |
| HCN (0-30 ppm) | ESR-A13D-HCN | Hydrogen cyanide 10 ppm | 34L · FX34-108-010 · $254 |
| NH3 (0-400 ppm) | ESR-B134-NH3 | Ammonia 25 ppm | 34L · FX34-106-025 · $239 |
| NO2 (0-20 ppm) | ESR-A13D-NO2 | Nitrogen dioxide 10 ppm | 34L · FX34-123-010 · $239 |
| PH3 (0-20 ppm) | ESR-A13D-PH3 | Phosphine 5 ppm | 34L · FX34-124-05 · $244 |
| SO2 (0-100 ppm) | ESR-A13D-SO2 | Sulfur dioxide 10 ppm | 34L · FX34-126-010 · $163 |
Unit part numbers: 73-0081
| Sensor | Calibrates to |
|---|---|
| SO2 | Sulfur dioxide 10 ppm |
Source: standard-target
Other sensors that fit this unit
| Sensor | Sensor part # | Calibrates to | |
|---|---|---|---|
| Cl2 (0-20 ppm) | ESR-B136-CL2 | Chlorine 10 ppm | 34L · FX34-130-10 · $239 |
| HCN (0-30 ppm) | ESR-A13D-HCN | Hydrogen cyanide 10 ppm | 34L · FX34-108-010 · $254 |
| NH3 (0-400 ppm) | ESR-B134-NH3 | Ammonia 25 ppm | 34L · FX34-106-025 · $239 |
| NO2 (0-20 ppm) | ESR-A13D-NO2 | Nitrogen dioxide 10 ppm | 34L · FX34-123-010 · $239 |
| PH3 (0-20 ppm) | ESR-A13D-PH3 | Phosphine 5 ppm | 34L · FX34-124-05 · $244 |
| SO2 (0-100 ppm) | ESR-A13D-SO2 | Sulfur dioxide 10 ppm | 34L · FX34-126-010 · $163 |
Unit part numbers: 400-AL-CA, 400-AL-SU, 400-AL-NI, 400-AL-PH, 400-AL-SI, 400-AL-AR · +44 more (search any part number)
Gas configurations for this unit
COCl2H2HCNHClHFNH3NO2O3PH3SO2
Other sensors that fit this unit
| Sensor | Sensor part # | Calibrates to | |
|---|---|---|---|
| AsH3 (0-0.2 ppm) | ESM-23AHS-ASH3 | Arsine Not stocked as a standalone cylinder — ask us. | |
| B2H6 (0-0.3 ppm) | ESM-23AY-B2H6 | Diborane Not stocked as a standalone cylinder — ask us. | |
| CO (0-150 ppm) | ESM-23-CO | Carbon monoxide 50 ppm | 34L · 34-10-0050 · $74 |
| Cl2 (0-3 ppm) | ESM-K233-CL2 | Chlorine 10 ppm | 34L · FX34-130-10 · $239 |
| F2 (0-3 ppm) | ESM-K233-F2 | Fluorine Not stocked as a standalone cylinder — ask us. | |
| GeH4 (0-0.8 ppm) | ESM-23DH-GEH4 | Germane Not stocked as a standalone cylinder — ask us. | |
| H2O2 (0-0.500 ppm) | ESM-23DH-H2O2-1 | Hydrogen peroxide Not stocked as a standalone cylinder — ask us. | |
| H2O2 (0-3 ppm) | ESM-23DH-H2O2 | Hydrogen peroxide Not stocked as a standalone cylinder — ask us. | |
| HCN (0-15 ppm) | ESM-23DH-HCN | Hydrogen cyanide 10 ppm | 34L · FX34-108-010 · $254 |
| HF (0-9 ppm) | ESM-K233-HF | Hydrogen fluoride Not stocked as a standalone cylinder — ask us. | |
| NO2 (0-15 ppm) | ESM-23AH-NO2 | Nitrogen dioxide 10 ppm | 34L · FX34-123-010 · $239 |
| O3 (0-1.0 ppm) | ESM-K239C-O3 | Ozone Not stocked as a standalone cylinder — ask us. | |
| PH3 (0-1 ppm) | ESM-23AH-PH3 | Phosphine 5 ppm | 34L · FX34-124-05 · $244 |
| SO2 (0-30 ppm) | ESM-23E-SO2 | Sulfur dioxide 10 ppm | 34L · FX34-126-010 · $163 |
| SO2 (0-6 ppm) | ESM-238-SO2 | Sulfur dioxide 10 ppm | 34L · FX34-126-010 · $163 |
| Si2H6 (0-15 ppm) | ESM-23DH-SI2H6 | Disilane Not stocked as a standalone cylinder — ask us. |
RKI Instruments 35-3001 fixed detector
Unit part numbers: 35-3001-11-0202, 35-3001-07-02, 35-3001-07-03, 35-3001-08, 35-3001-08-01, 35-3001-08-02 · +50 more (search any part number)
Gas configurations for this unit
LEL
Other sensors that fit this unit
| Sensor | Sensor part # | Calibrates to | |
|---|---|---|---|
| H2 (0 - 100 % LEL) | 61-0155RK | Hydrogen 50% LEL | 34L · 34-19-7500 · $70 |
| LEL (0 - 100% vol) | 61-5041RK-CH4 | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| LEL (0-100% LEL) | NC-6245 | Methane 50% LEL | 34L · 34-23-8600 · $70 |
RKI Instruments EC-600 fixed detector
Unit part numbers: 73-1202, 73-1202-03, 73-1202-05, 73-1202-10, 73-1202-20, 73-1203 · +9 more (search any part number)
| Sensor | Calibrates to |
|---|---|
| CO | Carbon monoxide 50 ppm |
Source: brand-standard (RKI mix 116)
RKI Instruments GD-70D (Catalytic / Oxygen / TEOS) fixed detector
Unit part numbers: GD-70D-XXX, GD-70DEA-NCU-6211, GD-70DEA-SSU-1925-A, GD-70DEA-NCU-6213-CH4, GD-70DEA-ESU-X23-OXY, GD-70DEA-SSU-1927
Gas configurations for this unit
CH4LELO2
Other sensors that fit this unit
| Sensor | Sensor part # | Calibrates to | |
|---|---|---|---|
| AsH3 (0-0.20 ppm) | ESU-C23F-ASH3 | Arsine Not stocked as a standalone cylinder — ask us. | |
| AsH3 (0-50 ppb) | ESU-C23F-S-ASH3 | Arsine Not stocked as a standalone cylinder — ask us. | |
| B2H6 (0-0.30 ppm) | ESU-23AY-B2H6 | Diborane Not stocked as a standalone cylinder — ask us. | |
| CO (0-150 ppm) | ESU-23-CO-150 | Carbon monoxide 50 ppm | 34L · 34-10-0050 · $74 |
| Cl2 (0-3.0 ppm) | ESU-K235-CL2-3 | Chlorine 10 ppm | 34L · FX34-130-10 · $239 |
| Cl2 (0-3.00 PPM) | ESU-K235L-CL2-3 | Chlorine 10 ppm | 34L · FX34-130-10 · $239 |
| ClF3 (0-0.60 ppm) | ESU-K233CS-CLFA | Chlorine trifluoride Not stocked as a standalone cylinder — ask us. | |
| F2 (0-3.0 ppm) | ESU-K235-F2-3 | Fluorine Not stocked as a standalone cylinder — ask us. | |
| GeH4 (0-0.80 ppm) | ESU-23DH-GEH4 | Germane Not stocked as a standalone cylinder — ask us. | |
| H2 (0 - 500 ppm) | SGU-8521-H2-500 · SGU-8541-H2-500 | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| H2 (0-1000 ppm) | SGU-8521-H2-1K · SGU-8541-H2-1K | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| H2 (0-2.0% vol) | SGU-8511-H2-20K | Hydrogen 50% LEL | 34L · 34-19-7500 · $70 |
| H2 (0-2000 ppm) | SGU-8541-H2-2K | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| H2 (0-4000 ppm) | SGU-8541-H2-4K | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| H2S (0-30 ppm) | ESU-237IF-H2S30 | Hydrogen sulfide 25 ppm | 11L · FX11-111-025 · $55 |
| HBr (0-6.00 ppm) | ESU-23E-HBR-06 | Hydrogen bromide Not stocked as a standalone cylinder — ask us. | |
| HBr (0-9.00 ppm) | ESU-23E-HBR-09 | Hydrogen bromide Not stocked as a standalone cylinder — ask us. | |
| HCN (0-15 ppm) | ESU-23DH-HCN | Hydrogen cyanide 10 ppm | 34L · FX34-108-010 · $254 |
| HCl (0-15 ppm) | ESU-23E-HCL-15 | Hydrogen chloride Not stocked as a standalone cylinder — ask us. | |
| HCl (0-6.00 ppm) | ESU-23E-HCL-06 | Hydrogen chloride Not stocked as a standalone cylinder — ask us. | |
| HF (0-9.0 ppm) | ESU-K233-HF-09 | Hydrogen fluoride Not stocked as a standalone cylinder — ask us. | |
| LEL (0 - 5000 ppm) | SGU-8511-CH4-5K | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| LEL (0-2.0% vol) | SGU-8511-CH4-20 | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| LEL (0-2000 ppm) | SGU-8581-CH4-2K | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| NH3 (0-75 ppm) | ESU-23R-NH3 | Ammonia 25 ppm | 34L · FX34-106-025 · $239 |
| NO (0-100 ppm) | ESU-23A-NO | Nitric oxide Not stocked as a standalone cylinder — ask us. | |
| NO2 (0-15 ppm) | ESU-23AR-NO2-15 | Nitrogen dioxide 10 ppm | 34L · FX34-123-010 · $239 |
| NO2 (0-9 ppm) | ESU-23AR-NO2-09 | Nitrogen dioxide 10 ppm | 34L · FX34-123-010 · $239 |
| O3 (0-0.60 ppm) | ESU-K239C-S-O3 | Ozone Not stocked as a standalone cylinder — ask us. | |
| PH3 (0-1.0 ppm) | ESU-23AH-PH3 | Phosphine 5 ppm | 34L · FX34-124-05 · $244 |
| Si2H6 (0-15 ppm) | ESU-23DH-SI2H6 | Disilane Not stocked as a standalone cylinder — ask us. |
RKI Instruments GD-70D (MOS Gases) fixed detector
Unit part numbers: GD-70DEA-XXX., GD-70DEA-SGU-8521-ACE-1K, GD-70DEA-SGU-8521-CH3CN, GD-70DEA-SGU-8521-C2H2-2, GD-70DEA-SGU-8562-COS-2K, GD-70DEA-SGU-8513-DCE-6 · +22 more (search any part number)
Gas configurations for this unit
CH4COSH2
Other sensors that fit this unit
| Sensor | Sensor part # | Calibrates to | |
|---|---|---|---|
| AsH3 (0-0.20 ppm) | ESU-C23F-ASH3 | Arsine Not stocked as a standalone cylinder — ask us. | |
| AsH3 (0-50 ppb) | ESU-C23F-S-ASH3 | Arsine Not stocked as a standalone cylinder — ask us. | |
| B2H6 (0-0.30 ppm) | ESU-23AY-B2H6 | Diborane Not stocked as a standalone cylinder — ask us. | |
| CO (0-150 ppm) | ESU-23-CO-150 | Carbon monoxide 50 ppm | 34L · 34-10-0050 · $74 |
| Cl2 (0-3.0 ppm) | ESU-K235-CL2-3 | Chlorine 10 ppm | 34L · FX34-130-10 · $239 |
| Cl2 (0-3.00 PPM) | ESU-K235L-CL2-3 | Chlorine 10 ppm | 34L · FX34-130-10 · $239 |
| ClF3 (0-0.60 ppm) | ESU-K233CS-CLFA | Chlorine trifluoride Not stocked as a standalone cylinder — ask us. | |
| F2 (0-3.0 ppm) | ESU-K235-F2-3 | Fluorine Not stocked as a standalone cylinder — ask us. | |
| GeH4 (0-0.80 ppm) | ESU-23DH-GEH4 | Germane Not stocked as a standalone cylinder — ask us. | |
| H2 (0 - 500 ppm) | SGU-8521-H2-500 · SGU-8541-H2-500 | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| H2 (0-1000 ppm) | SGU-8521-H2-1K · SGU-8541-H2-1K | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| H2 (0-2.0% vol) | SGU-8511-H2-20K | Hydrogen 50% LEL | 34L · 34-19-7500 · $70 |
| H2 (0-2000 ppm) | SGU-8541-H2-2K | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| H2 (0-4000 ppm) | SGU-8541-H2-4K | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| H2S (0-30 ppm) | ESU-237IF-H2S30 | Hydrogen sulfide 25 ppm | 11L · FX11-111-025 · $55 |
| HBr (0-6.00 ppm) | ESU-23E-HBR-06 | Hydrogen bromide Not stocked as a standalone cylinder — ask us. | |
| HBr (0-9.00 ppm) | ESU-23E-HBR-09 | Hydrogen bromide Not stocked as a standalone cylinder — ask us. | |
| HCN (0-15 ppm) | ESU-23DH-HCN | Hydrogen cyanide 10 ppm | 34L · FX34-108-010 · $254 |
| HCl (0-15 ppm) | ESU-23E-HCL-15 | Hydrogen chloride Not stocked as a standalone cylinder — ask us. | |
| HCl (0-6.00 ppm) | ESU-23E-HCL-06 | Hydrogen chloride Not stocked as a standalone cylinder — ask us. | |
| HF (0-9.0 ppm) | ESU-K233-HF-09 | Hydrogen fluoride Not stocked as a standalone cylinder — ask us. | |
| LEL (0 - 5000 ppm) | SGU-8511-CH4-5K | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| LEL (0-2.0% vol) | SGU-8511-CH4-20 | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| LEL (0-2000 ppm) | SGU-8581-CH4-2K | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| NH3 (0-75 ppm) | ESU-23R-NH3 | Ammonia 25 ppm | 34L · FX34-106-025 · $239 |
| NO (0-100 ppm) | ESU-23A-NO | Nitric oxide Not stocked as a standalone cylinder — ask us. | |
| NO2 (0-15 ppm) | ESU-23AR-NO2-15 | Nitrogen dioxide 10 ppm | 34L · FX34-123-010 · $239 |
| NO2 (0-9 ppm) | ESU-23AR-NO2-09 | Nitrogen dioxide 10 ppm | 34L · FX34-123-010 · $239 |
| O3 (0-0.60 ppm) | ESU-K239C-S-O3 | Ozone Not stocked as a standalone cylinder — ask us. | |
| PH3 (0-1.0 ppm) | ESU-23AH-PH3 | Phosphine 5 ppm | 34L · FX34-124-05 · $244 |
| Si2H6 (0-15 ppm) | ESU-23DH-SI2H6 | Disilane Not stocked as a standalone cylinder — ask us. |
RKI Instruments GD-70D (Toxic Gases) fixed detector
Unit part numbers: GD-70DEA-ACET, GD-70DEA-ASH3, GD-70DEA-ASH350, GD-70DEA-B2H6, GD-70DEA-BR2, GD-70DEA-BTBAS · +59 more (search any part number)
Gas configurations for this unit
CH4COH2HBrHCNHFLELNH3NONO2O2O3PH3
Other sensors that fit this unit
| Sensor | Sensor part # | Calibrates to | |
|---|---|---|---|
| AsH3 (0-0.20 ppm) | ESU-C23F-ASH3 | Arsine Not stocked as a standalone cylinder — ask us. | |
| AsH3 (0-50 ppb) | ESU-C23F-S-ASH3 | Arsine Not stocked as a standalone cylinder — ask us. | |
| B2H6 (0-0.30 ppm) | ESU-23AY-B2H6 | Diborane Not stocked as a standalone cylinder — ask us. | |
| CO (0-150 ppm) | ESU-23-CO-150 | Carbon monoxide 50 ppm | 34L · 34-10-0050 · $74 |
| Cl2 (0-3.0 ppm) | ESU-K235-CL2-3 | Chlorine 10 ppm | 34L · FX34-130-10 · $239 |
| Cl2 (0-3.00 PPM) | ESU-K235L-CL2-3 | Chlorine 10 ppm | 34L · FX34-130-10 · $239 |
| ClF3 (0-0.60 ppm) | ESU-K233CS-CLFA | Chlorine trifluoride Not stocked as a standalone cylinder — ask us. | |
| F2 (0-3.0 ppm) | ESU-K235-F2-3 | Fluorine Not stocked as a standalone cylinder — ask us. | |
| GeH4 (0-0.80 ppm) | ESU-23DH-GEH4 | Germane Not stocked as a standalone cylinder — ask us. | |
| H2 (0 - 500 ppm) | SGU-8521-H2-500 · SGU-8541-H2-500 | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| H2 (0-1000 ppm) | SGU-8521-H2-1K · SGU-8541-H2-1K | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| H2 (0-2.0% vol) | SGU-8511-H2-20K | Hydrogen 50% LEL | 34L · 34-19-7500 · $70 |
| H2 (0-2000 ppm) | SGU-8541-H2-2K | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| H2 (0-4000 ppm) | SGU-8541-H2-4K | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| H2S (0-30 ppm) | ESU-237IF-H2S30 | Hydrogen sulfide 25 ppm | 11L · FX11-111-025 · $55 |
| HBr (0-6.00 ppm) | ESU-23E-HBR-06 | Hydrogen bromide Not stocked as a standalone cylinder — ask us. | |
| HBr (0-9.00 ppm) | ESU-23E-HBR-09 | Hydrogen bromide Not stocked as a standalone cylinder — ask us. | |
| HCN (0-15 ppm) | ESU-23DH-HCN | Hydrogen cyanide 10 ppm | 34L · FX34-108-010 · $254 |
| HCl (0-15 ppm) | ESU-23E-HCL-15 | Hydrogen chloride Not stocked as a standalone cylinder — ask us. | |
| HCl (0-6.00 ppm) | ESU-23E-HCL-06 | Hydrogen chloride Not stocked as a standalone cylinder — ask us. | |
| HF (0-9.0 ppm) | ESU-K233-HF-09 | Hydrogen fluoride Not stocked as a standalone cylinder — ask us. | |
| LEL (0 - 5000 ppm) | SGU-8511-CH4-5K | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| LEL (0-2.0% vol) | SGU-8511-CH4-20 | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| LEL (0-2000 ppm) | SGU-8581-CH4-2K | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| NH3 (0-75 ppm) | ESU-23R-NH3 | Ammonia 25 ppm | 34L · FX34-106-025 · $239 |
| NO (0-100 ppm) | ESU-23A-NO | Nitric oxide Not stocked as a standalone cylinder — ask us. | |
| NO2 (0-15 ppm) | ESU-23AR-NO2-15 | Nitrogen dioxide 10 ppm | 34L · FX34-123-010 · $239 |
| NO2 (0-9 ppm) | ESU-23AR-NO2-09 | Nitrogen dioxide 10 ppm | 34L · FX34-123-010 · $239 |
| O3 (0-0.60 ppm) | ESU-K239C-S-O3 | Ozone Not stocked as a standalone cylinder — ask us. | |
| PH3 (0-1.0 ppm) | ESU-23AH-PH3 | Phosphine 5 ppm | 34L · FX34-124-05 · $244 |
| Si2H6 (0-15 ppm) | ESU-23DH-SI2H6 | Disilane Not stocked as a standalone cylinder — ask us. |
RKI Instruments M-Series fixed detector
Unit part numbers: 65-2424RK, 65-2434RK, RI-257-XXX
Gas configurations for this unit
COH2S
RKI Instruments M2A-XL (Explosion Proof) fixed detector
Unit part numbers: 65-2640XL, 65-2640XL-05, 65-2647XL, 65-2647XL-05, 65-2667XL-CH4, 65-2667XL-HC · +13 more (search any part number)
Gas configurations for this unit
CH4COCO2H2H2SHCNLELO2
Other sensors that fit this unit
| Sensor | Sensor part # | Calibrates to | |
|---|---|---|---|
| CO2 (0-100% Volume) | 61-0191RK-10 | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| CO2 (0-5% Volume) | 61-0191RK-03 | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| CO2 (0-5,000 ppm) | 61-0191RK-02 | Carbon dioxide 5,000 ppm | 34L · 34-08-3300 · $70 |
| CO2 (0-50% Volume) | 61-0191RK-05 | Match the concentration stored in the device — ask us and we'll match a cylinder to it. |
RKI Instruments M2A-XL (Non-Explosion Proof) fixed detector
Unit part numbers: 65-2670XL-NH375, 65-2670XL-NH3-1, 65-2670XL-NH3-2, 65-2670XL-NH3-5, 65-2663XL, 65-2670XL-CL2-3 · +19 more (search any part number)
Gas configurations for this unit
COCO2Cl2H2SHCNNH3NO2O2PH3SO2
Other sensors that fit this unit
| Sensor | Sensor part # | Calibrates to | |
|---|---|---|---|
| CO2 (0-100% Volume) | 61-0191RK-10 | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| CO2 (0-5% Volume) | 61-0191RK-03 | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| CO2 (0-5,000 ppm) | 61-0191RK-02 | Carbon dioxide 5,000 ppm | 34L · 34-08-3300 · $70 |
| CO2 (0-50% Volume) | 61-0191RK-05 | Match the concentration stored in the device — ask us and we'll match a cylinder to it. |
RKI Instruments OX-600 fixed detector
Unit part numbers: 72-1004, 72-1004-03, 72-1004-05, 72-1004-10, 72-1004-20, 72-1005 · +9 more (search any part number)
| Sensor | Calibrates to |
|---|---|
| O2 | Oxygen 20.9% (zero air) — span |
Source: universal
RKI Instruments PS 2 fixed detector
Unit part numbers: 73-1020RK-01, 73-1021RK-01, 73-1022RK-01
| Sensor | Calibrates to |
|---|---|
| LEL | Methane 50% LEL |
Source: brand-standard (RKI mix 116)
RKI Instruments RI-600 fixed detector
Unit part numbers: 73-1205-02K, 73-1205-05K, 73-1205-10K, 73-1205-20K, 73-1205-50K, 73-1206-02K · +4 more (search any part number)
| Sensor | Calibrates to |
|---|---|
| CO2 | Carbon dioxide 5,000 ppm |
Source: standard-target
RKI Instruments S2 Series fixed detector
Unit part numbers: 65-2341-CLO2-3, 65-2397RK-02, 65-2397RK-03, 65-2397RK-05, 65-2320RK, 65-2321RK · +52 more (search any part number)
Gas configurations for this unit
CH4COCO2Cl2H2H2SHCNLELNH3NONO2O2PH3SO2
Other sensors that fit this unit
| Sensor | Sensor part # | Calibrates to | |
|---|---|---|---|
| CO2 (0-100% Volume) | 61-0191RK-10 | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| CO2 (0-5% Volume) | 61-0191RK-03 | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| CO2 (0-5,000 ppm) | 61-0191RK-02 | Carbon dioxide 5,000 ppm | 34L · 34-08-3300 · $70 |
| CO2 (0-50% Volume) | 61-0191RK-05 | Match the concentration stored in the device — ask us and we'll match a cylinder to it. |
RKI Instruments SD-1 fixed detector
Unit part numbers: SD-1EC-CO-75, SD-1OX-HS, SD-1EC-H2S-HS, SD-1EC-CO-HS, SD-1OX-H, SD-1EC-H2S-H · +16 more (search any part number)
Gas configurations for this unit
CH4COCO2H2H2SLELO2
Other sensors that fit this unit
| Sensor | Sensor part # | Calibrates to | |
|---|---|---|---|
| CO (0-75 ppm) | ES-831-CO | Carbon monoxide 50 ppm | 34L · 34-10-0050 · $74 |
| H2S (0-30 ppm) | ES-837RP | Hydrogen sulfide 25 ppm | 11L · FX11-111-025 · $55 |
| LEL (0-100% LEL) | NC-6245 | Methane 50% LEL | 34L · 34-23-8600 · $70 |
| LEL (See specifications) | NC-6239 | Methane 50% LEL | 34L · 34-23-8600 · $70 |
| O2 (0-25% vol) | OS-B11E-A | Oxygen 20.9% (zero air) — span; Nitrogen 99.999% UHP — zero Not stocked as a standalone cylinder — ask us. |
RKI Instruments T2A fixed detector
Unit part numbers: 66-6203-2K, 66-6204-99, 66-6204-20, 66-6204-30, 66-6205-15, 66-6205-30 · +33 more (search any part number)
Gas configurations for this unit
COCl2ETOH2H2SHCNHClHFLELNH3NONO2O2O3PH3SO2
Other sensors that fit this unit
| Sensor | Sensor part # | Calibrates to | |
|---|---|---|---|
| AsH3 (0 - 1 ppm) | 66-0068 | Arsine Not stocked as a standalone cylinder — ask us. | |
| CO (0 - 1000 ppm) | 66-0001 | Carbon monoxide 50 ppm | 34L · 34-10-0050 · $74 |
| Cl2 (See specifications) | 66-0012 | Chlorine 10 ppm | 34L · FX34-130-10 · $239 |
| H2 (0 - 100% LEL; 0-4% vol) | 66-0039 | Hydrogen 50% LEL | 34L · 34-19-7500 · $70 |
| H2S (0 - 100 ppm) | 66-0003-1 | Hydrogen sulfide 25 ppm | 11L · FX11-111-025 · $55 |
| H2S (See specifications) | 66-0003-2 | Hydrogen sulfide 25 ppm | 11L · FX11-111-025 · $55 |
| HCN (0 - 50 ppm) | 66-0005 | Hydrogen cyanide 10 ppm | 34L · FX34-108-010 · $254 |
| HCl (See specifications) | 66-0004-1 · 66-0004-2 | Hydrogen chloride Not stocked as a standalone cylinder — ask us. | |
| HF (0 - 10 ppm) | 66-0014 | Hydrogen fluoride Not stocked as a standalone cylinder — ask us. | |
| NH3 (See specifications) | 66-0006-2 · 66-0006L-1 · 66-0006N-1 · 66-0006N-2 | Ammonia 25 ppm | 34L · FX34-106-025 · $239 |
| NO (See specifications) | 66-0007 | Nitric oxide Not stocked as a standalone cylinder — ask us. | |
| NO2 (0 - 20 ppm) | 66-0008 | Nitrogen dioxide 10 ppm | 34L · FX34-123-010 · $239 |
| O2 (0 - 25 % vol) | 66-0002 | Oxygen 20.9% (zero air) — span; Nitrogen 99.999% UHP — zero Not stocked as a standalone cylinder — ask us. | |
| O3 (0 - 5 ppm) | 66-0009-1 | Ozone Not stocked as a standalone cylinder — ask us. | |
| PH3 (0 - 5 ppm) | 66-0015 | Phosphine 5 ppm | 34L · FX34-124-05 · $244 |
| SO2 (0 - 20 ppm) | 66-0010 | Sulfur dioxide 10 ppm | 34L · FX34-126-010 · $163 |
RKI Instruments T3A fixed detector
Unit part numbers: 66-6303-02, 66-6339-40, 66-6304-99, 66-6304-20, 66-6304-30, 66-6305-50 · +31 more (search any part number)
Gas configurations for this unit
CH4COCO2Cl2ETOH2H2SHCNHClHFLELNH3NONO2O2O3PH3SO2
Other sensors that fit this unit
| Sensor | Sensor part # | Calibrates to | |
|---|---|---|---|
| AsH3 (0 - 1 ppm) | 66-0068 | Arsine Not stocked as a standalone cylinder — ask us. | |
| CO (0 - 1000 ppm) | 66-0001 | Carbon monoxide 50 ppm | 34L · 34-10-0050 · $74 |
| CO2 (0 - 5 % vol) | 66-0050 | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| CO2 (0 - 5000 ppm) | 66-0054 | Carbon dioxide 5,000 ppm | 34L · 34-08-3300 · $70 |
| Cl2 (See specifications) | 66-0012 | Chlorine 10 ppm | 34L · FX34-130-10 · $239 |
| H2 (0 - 100% LEL; 0-4% vol) | 66-0039 | Hydrogen 50% LEL | 34L · 34-19-7500 · $70 |
| H2S (0 - 100 ppm) | 66-0003-1 | Hydrogen sulfide 25 ppm | 11L · FX11-111-025 · $55 |
| H2S (See specifications) | 66-0003-2 | Hydrogen sulfide 25 ppm | 11L · FX11-111-025 · $55 |
| HC (0-100% LEL) | 66-0053 | Methane 50% LEL | 34L · 34-23-8600 · $70 |
| HCN (0 - 50 ppm) | 66-0005 | Hydrogen cyanide 10 ppm | 34L · FX34-108-010 · $254 |
| HCl (See specifications) | 66-0004-1 · 66-0004-2 | Hydrogen chloride Not stocked as a standalone cylinder — ask us. | |
| HF (0 - 10 ppm) | 66-0014 | Hydrogen fluoride Not stocked as a standalone cylinder — ask us. | |
| LEL (0 - 100 % LEL) | 66-0040 · 66-0051 | Methane 50% LEL | 34L · 34-23-8600 · $70 |
| LEL (0 - 100 % vol) | 66-0052 | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| NH3 (See specifications) | 66-0006-2 · 66-0006N-1 | Ammonia 25 ppm | 34L · FX34-106-025 · $239 |
| NO (See specifications) | 66-0007 | Nitric oxide Not stocked as a standalone cylinder — ask us. | |
| NO2 (0 - 20 ppm) | 66-0008 | Nitrogen dioxide 10 ppm | 34L · FX34-123-010 · $239 |
| O2 (0 - 25 % vol) | 66-0002 | Oxygen 20.9% (zero air) — span; Nitrogen 99.999% UHP — zero Not stocked as a standalone cylinder — ask us. | |
| O3 (0 - 5 ppm) | 66-0009-1 | Ozone Not stocked as a standalone cylinder — ask us. | |
| PH3 (0 - 5 ppm) | 66-0015 | Phosphine 5 ppm | 34L · FX34-124-05 · $244 |
| SO2 (0 - 20 ppm) | 66-0010 | Sulfur dioxide 10 ppm | 34L · FX34-126-010 · $163 |
Senko
SENKO's own manuals were located on dealer sites: MGT and SGT values are shown on those units. Models without published values say so — SENKO specifies calibrating with gas matched to the concentrations stored in the device.
Unit part numbers: AAA118194, AAA118197, AAA118198, AAA118199, AAA118200, AAA118201 · +9 more (search any part number)
Sensors on this unit
O2NH3NO2SO2LELCO2COH2SH2O3
SENKO publishes no default span for this sensor — calibrate with gas matched to the concentration stored in the device.
Other sensors that fit this unit
| Sensor | Sensor part # | Calibrates to | |
|---|---|---|---|
| CO | ACC000102 | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| CO2 | ACS000002 | Carbon dioxide 5,000 ppm SENKO publishes no default span; the gas shown is a CPS stocked option, not a SENKO-published default — match the concentration set in the instrument. | 34L · 34-08-3300 · $70 |
| H2 | ACC000105 | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| H2S | ACC000103 | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| LEL | ACS000001 | Methane 50% LEL SENKO publishes no default span; the gas shown is a CPS stocked option, not a SENKO-published default — match the concentration set in the instrument. | 34L · 34-23-8600 · $70 |
| NH3 | ACC000107 | Ammonia 25 ppm SENKO publishes no default span; the gas shown is a CPS stocked option, not a SENKO-published default — match the concentration set in the instrument. | 34L · FX34-106-025 · $239 |
| NO2 | ACC000106 | Nitrogen dioxide 10 ppm SENKO publishes no default span; the gas shown is a CPS stocked option, not a SENKO-published default — match the concentration set in the instrument. | 34L · FX34-123-010 · $239 |
| O2 | ACC000101 | Oxygen 20.9% (zero air) — span; Nitrogen 99.999% UHP — zero Not stocked as a standalone cylinder — ask us. SENKO publishes no default span; the gas shown is a CPS stocked option, not a SENKO-published default — match the concentration set in the instrument. | |
| SO2 | ACC000104 | Sulfur dioxide 10 ppm SENKO publishes no default span; the gas shown is a CPS stocked option, not a SENKO-published default — match the concentration set in the instrument. | 34L · FX34-126-010 · $163 |
Unit part numbers: AAA077025
Sensors on this unit
CO2
SENKO publishes no default span for this sensor — calibrate with gas matched to the concentration stored in the device.
Unit part numbers: AAA067056, AAA067131, AAA067270, AAA067048, AAA067257, AAA067002 · +5 more (search any part number)
| Sensor | Calibrates to |
|---|---|
| LEL | Methane 50% LEL |
| O2 | Oxygen 17% |
| CO | Carbon monoxide 100 ppm |
| H2S | Hydrogen sulfide 25 ppm |
Source: SENKO MGT User Manual §5.2 (manufacturer manual; copy hosted by International Gas Detectors)
Other sensors that fit this unit
| Sensor | Sensor part # | Calibrates to | |
|---|---|---|---|
| CO/H2S | ACA006001 | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| LEL | ACJ000001 · ACK000001 | Methane 50% LEL SENKO publishes no default span; the gas shown is a CPS stocked option, not a SENKO-published default — match the concentration set in the instrument. | 34L · 34-23-8600 · $70 |
| O2 | ACC000901 | Oxygen 20.9% (zero air) — span; Nitrogen 99.999% UHP — zero Not stocked as a standalone cylinder — ask us. SENKO publishes no default span; the gas shown is a CPS stocked option, not a SENKO-published default — match the concentration set in the instrument. |
Unit part numbers: AAA104056, AAA104142, AAA104153, AAA104160, AAA104152, AAA103173 · +30 more (search any part number)
| Sensor | Calibrates to |
|---|---|
| LEL | Methane 50% LEL |
| O2 | Oxygen 17% |
| CO | Carbon monoxide 100 ppm |
| H2S | Hydrogen sulfide 25 ppm |
Source: SENKO MGT User Manual §5.2 (manufacturer manual; copy hosted by International Gas Detectors)
Other sensors that fit this unit
| Sensor | Sensor part # | Calibrates to | |
|---|---|---|---|
| NO | — | Nitric oxide Not stocked as a standalone cylinder — ask us. SENKO publishes no default span; the gas shown is a CPS stocked option, not a SENKO-published default — match the concentration set in the instrument. | |
| H2O2 | — | Hydrogen peroxide Not stocked as a standalone cylinder — ask us. SENKO publishes no default span; the gas shown is a CPS stocked option, not a SENKO-published default — match the concentration set in the instrument. | |
| CH4/CO2 | ACI000067 | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| CO/H2S | ACA006001 | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| Cl2 | ACA005006 | Chlorine 10 ppm SENKO publishes no default span; the gas shown is a CPS stocked option, not a SENKO-published default — match the concentration set in the instrument. | 34L · FX34-130-10 · $239 |
| H2 | ACA005007 | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| HCN | ACH000010 | Hydrogen cyanide 10 ppm SENKO publishes no default span; the gas shown is a CPS stocked option, not a SENKO-published default — match the concentration set in the instrument. | 34L · FX34-108-010 · $254 |
| HCl | ACH000003 | Hydrogen chloride Not stocked as a standalone cylinder — ask us. SENKO publishes no default span; the gas shown is a CPS stocked option, not a SENKO-published default — match the concentration set in the instrument. | |
| HF | ACH000005 | Hydrogen fluoride Not stocked as a standalone cylinder — ask us. SENKO publishes no default span; the gas shown is a CPS stocked option, not a SENKO-published default — match the concentration set in the instrument. | |
| LEL | ACJ000001 · ACK000001 | Methane 50% LEL SENKO publishes no default span; the gas shown is a CPS stocked option, not a SENKO-published default — match the concentration set in the instrument. | 34L · 34-23-8600 · $70 |
| NH3 | ACF000001 | Ammonia 25 ppm SENKO publishes no default span; the gas shown is a CPS stocked option, not a SENKO-published default — match the concentration set in the instrument. | 34L · FX34-106-025 · $239 |
| NO2 | ACA005005 | Nitrogen dioxide 10 ppm SENKO publishes no default span; the gas shown is a CPS stocked option, not a SENKO-published default — match the concentration set in the instrument. | 34L · FX34-123-010 · $239 |
| O2 | ACC000901 | Oxygen 20.9% (zero air) — span; Nitrogen 99.999% UHP — zero Not stocked as a standalone cylinder — ask us. SENKO publishes no default span; the gas shown is a CPS stocked option, not a SENKO-published default — match the concentration set in the instrument. | |
| PID (0~100 ppm, 10.0 eV) | ACL000016 | Isobutylene 100 ppm SENKO publishes no default span; the gas shown is a CPS stocked option, not a SENKO-published default — match the concentration set in the instrument. | 34L · 34-21-0100 · $74 |
| PID (0~40 ppm, 10.6 eV) | ACL000012 | Isobutylene 100 ppm SENKO publishes no default span; the gas shown is a CPS stocked option, not a SENKO-published default — match the concentration set in the instrument. | 34L · 34-21-0100 · $74 |
| PID (0~4000 ppm, 10.6 eV) | ACL000010 | Isobutylene 100 ppm SENKO publishes no default span; the gas shown is a CPS stocked option, not a SENKO-published default — match the concentration set in the instrument. | 34L · 34-21-0100 · $74 |
| SO2 | ACB000003 | Sulfur dioxide 10 ppm SENKO publishes no default span; the gas shown is a CPS stocked option, not a SENKO-published default — match the concentration set in the instrument. | 34L · FX34-126-010 · $163 |
Unit part numbers: AAA066002, AAA066004, AAA066012, AAA066016, AAA066014, AAA066017 · +1 more (search any part number)
| Sensor | Calibrates to |
|---|---|
| CO | Carbon monoxide 100 ppm |
| H2 | Hydrogen 500 ppm |
| H2S | Hydrogen sulfide 50 ppm |
| NH3 | Ammonia 100 ppm |
| NO2 | Nitrogen dioxide 10 ppm |
| SO2 | Sulfur dioxide 10 ppm |
| O2 | SENKO publishes no default span for this sensor — calibrate with gas matched to the concentration stored in the device. |
Source: SENKO SGT User Manual (manufacturer manual; third-party hosted copy)
Unit part numbers: AAA064002, AAA064004, AAA064012, AAA064016, AAA064014, AAA064017 · +5 more (search any part number)
| Sensor | Calibrates to |
|---|---|
| Cl2 | Chlorine 10 ppm |
| HCN | SENKO publishes no default span for this sensor — calibrate with gas matched to the concentration stored in the device. |
| NH3 | Ammonia 100 ppm |
| NO2 | Nitrogen dioxide 10 ppm |
| PH3 | SENKO publishes no default span for this sensor — calibrate with gas matched to the concentration stored in the device. |
| SO2 | Sulfur dioxide 10 ppm |
| O2 | SENKO publishes no default span for this sensor — calibrate with gas matched to the concentration stored in the device. |
| CO | Carbon monoxide 100 ppm |
| H2S | Hydrogen sulfide 50 ppm |
| H2 | Hydrogen 500 ppm |
| HCl | SENKO publishes no default span for this sensor — calibrate with gas matched to the concentration stored in the device. |
Source: SENKO SGT User Manual (manufacturer manual; third-party hosted copy)
Other sensors that fit this unit
| Sensor | Sensor part # | Calibrates to | |
|---|---|---|---|
| CO | ACA005001 | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| Cl2 | ACA005008-CL2 | Chlorine 10 ppm SENKO publishes no default span; the gas shown is a CPS stocked option, not a SENKO-published default — match the concentration set in the instrument. | 34L · FX34-130-10 · $239 |
| H2 | ACA005007 | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| H2S | ACA005003 | Match the concentration stored in the device — ask us and we'll match a cylinder to it. | |
| HCN | ACA005008-HCN | Hydrogen cyanide 10 ppm SENKO publishes no default span; the gas shown is a CPS stocked option, not a SENKO-published default — match the concentration set in the instrument. | 34L · FX34-108-010 · $254 |
| HCl | ACA005008-HCL | Hydrogen chloride Not stocked as a standalone cylinder — ask us. SENKO publishes no default span; the gas shown is a CPS stocked option, not a SENKO-published default — match the concentration set in the instrument. | |
| NH3 | ACA005008-NH3 | Ammonia 25 ppm SENKO publishes no default span; the gas shown is a CPS stocked option, not a SENKO-published default — match the concentration set in the instrument. | 34L · FX34-106-025 · $239 |
| NO2 | ACA005005 | Nitrogen dioxide 10 ppm SENKO publishes no default span; the gas shown is a CPS stocked option, not a SENKO-published default — match the concentration set in the instrument. | 34L · FX34-123-010 · $239 |
| O2 | ACC000901 | Oxygen 20.9% (zero air) — span; Nitrogen 99.999% UHP — zero Not stocked as a standalone cylinder — ask us. SENKO publishes no default span; the gas shown is a CPS stocked option, not a SENKO-published default — match the concentration set in the instrument. | |
| SO2 | ACB000003 | Sulfur dioxide 10 ppm SENKO publishes no default span; the gas shown is a CPS stocked option, not a SENKO-published default — match the concentration set in the instrument. | 34L · FX34-126-010 · $163 |
Unit part numbers: AAA141177, AAA142263
Sensors on this unit
PID
SENKO publishes no default span for this sensor — calibrate with gas matched to the concentration stored in the device.
Senko SI-200E fixed detector
Unit part numbers: ABA127002, ABA127002LF, ABA127193, ABA127004, ABA127180, ABA127012 · +40 more (search any part number)
Gas configurations for this unit
ETOLELVOC
Senko SI-301 fixed detector
Unit part numbers: ABA105002, ABA105004, ABA105169, ABA105169-500, ABA105114, ABA105104 · +18 more (search any part number)
Gas configurations for this unit
LEL
Senko SI-H100 fixed detector
Unit part numbers: ABA099090, ABA099110, ABA099108, ABA099223, ABA099102, ABA099031 · +50 more (search any part number)
Gas configurations for this unit
CH4COCOSCl2H2H2SHBrHFLELNH3NONO2O2O3PH3SO2VOC
Sensit Technologies
Unit part numbers: 906-00000-08, 906-00000-09, 906-00000-12
| Sensor | Calibrates to |
|---|---|
| LEL | Methane 50% LEL |
Source: standard-target
Unit part numbers: 907-00000-01, 907-00000-02
| Sensor | Calibrates to |
|---|---|
| LEL | Methane 50% LEL |
Source: standard-target
Unit part numbers: 907-00000-07, 907-00000-08
| Sensor | Calibrates to |
|---|---|
| LEL | Methane 50% LEL |
Source: standard-target
Unit part numbers: 912-00000-03, 912-00000-04, 912-00000-05, 912-00000-06, 912-00000-07, 912-00000-08 · +8 more (search any part number)
| Sensor | Calibrates to |
|---|---|
| CO (% range label) | No manufacturer default published — match the concentration set in the instrument. |
| H2S | Hydrogen sulfide 25 ppm |
| HCN | Hydrogen cyanide 10 ppm |
| NO2 | Nitrogen dioxide 10 ppm |
| SO2 | Sulfur dioxide 10 ppm |
| O2 | Oxygen 20.9% (zero air) — span |
Source: unresolved · universal-default · standard-target · universal
Unit part numbers: 913-00000-04, 913-00000-10
| Sensor | Calibrates to |
|---|---|
| CO | Carbon monoxide 50 ppm |
| O2 | Oxygen 20.9% (zero air) — span |
Source: universal-default · universal
Unit part numbers: 909-00000-A, 909-00000-B, 909-00000-C, 909-00000-D, 909-00000-E, 909-00000-F · +3 more (search any part number)
| Sensor | Calibrates to |
|---|---|
| LEL | Methane 50% LEL |
| O2 | Oxygen 20.9% (zero air) — span |
| CO | Carbon monoxide 50 ppm |
| H2S | Hydrogen sulfide 25 ppm |
| HCN | Hydrogen cyanide 10 ppm |
Source: universal-default · standard-target
Unit part numbers: 910-00100-A, 910-00100-B, 910-00100-C, 910-00100-D, 910-00100-E, 910-00100-F · +3 more (search any part number)
| Sensor | Calibrates to |
|---|---|
| LEL | Methane 50% LEL |
| O2 | Oxygen 20.9% (zero air) — span |
| CO | Carbon monoxide 50 ppm |
| H2S | Hydrogen sulfide 25 ppm |
| LEL %Vol | No manufacturer default published — match the concentration set in the instrument. |
Source: universal-default · unresolved
Unit part numbers: 911-00000-01, 911-00000-02, 911-00000-03, 911-00000-04, 911-00000-05, 911-00000-06 · +3 more (search any part number)
| Sensor | Calibrates to |
|---|---|
| LEL | Methane 50% LEL |
| O2 | Oxygen 20.9% (zero air) — span |
| CO | Carbon monoxide 50 ppm |
| H2S | Hydrogen sulfide 25 ppm |
| HCN | Hydrogen cyanide 10 ppm |
Source: universal-default · standard-target
Unit part numbers: 945-00000-1000-G, 945-00000-1000, 945-00000-1100-G, 945-00000-1100, 945-00000-1200-G, 945-00000-1200 · +16 more (search any part number)
| Sensor | Calibrates to |
|---|---|
| LEL | Methane 50% LEL |
| O2 | Oxygen 20.9% (zero air) — span |
| CO | Carbon monoxide 50 ppm |
| H2S | Hydrogen sulfide 25 ppm |
| HCN | Hydrogen cyanide 10 ppm |
Source: universal-default · standard-target
Unit part numbers: 913-00000-11, 913-00000-12
| Sensor | Calibrates to |
|---|---|
| HCN | Hydrogen cyanide 10 ppm |
| CO | Carbon monoxide 50 ppm |
Source: standard-target · universal-default
Unit part numbers: 933-00000-01, 933-00000-02, 933-00000-03, 933-00000-04, 933-00000-05, 933-00000-06
| Sensor | Calibrates to |
|---|---|
| LEL | Methane 50% LEL |
| O2 | Oxygen 20.9% (zero air) — span |
| CO | Carbon monoxide 50 ppm |
| H2S | Hydrogen sulfide 25 ppm |
Source: universal-default
Unit part numbers: 920-00000-01, 920-00000-02, 920-00000-03, 920-00000-04, 920-00000-05, 920-00000-06 · +12 more (search any part number)
| Sensor | Calibrates to |
|---|---|
| LEL | Methane 50% LEL |
| O2 | Oxygen 20.9% (zero air) — span |
| CO | Carbon monoxide 50 ppm |
| H2S | Hydrogen sulfide 25 ppm |
| HCN | Hydrogen cyanide 10 ppm |
Source: universal-default · standard-target
Honeywell BW
Values per the BW GasAlertMicroClip manual (D5908), which lists the standard quad cylinder.
Honeywell BW published standard
Honeywell BW quad cylinder CG-Q34-4 (34 L) / CG-Q58-4 (58 L): CH4 2.5% / O2 18.0% / H2S 25 ppm / CO 100 ppm, balance N2
Source: Honeywell support article (BW quad cylinder CG-Q34-4 / CG-Q58-4), sps-support.honeywell.com
| Sensor | Calibrates to |
|---|---|
| LEL | Methane 50% LEL |
| O2 | Oxygen 18% |
| CO | Carbon monoxide 100 ppm |
| H2S | Hydrogen sulfide 25 ppm |
CPS calibration gas for these instruments
4-Gas Calibration Gas – BW Equivalent – H₂S 25 / CO 100 / CH₄ 50% LEL / O₂ 18%Matches the manufacturer's published standard mix above.
Dräger
The standard below is Dräger's own standard mixed gas cylinder 68 11 130, per the X-am technical manuals.
Dräger published standard
Dräger standard mixed gas cylinder 68 11 130: CO 50 ppm / H2S 15 ppm / CH4 2.5 vol% / O2 18 vol%
Source: Technical Manual X-am 3500/8000, 9033665 en Ed. 9, draeger.com (standard mixed gas cylinder 68 11 130); X-am 5000 Technical Manual 9023999 Ed. 17, draeger.com
| Sensor | Calibrates to |
|---|---|
| LEL | Methane 2.5 vol% (50% LEL) |
| O2 | Oxygen 18 vol% |
| CO | Carbon monoxide 50 ppm |
| H2S | Hydrogen sulfide 15 ppm |
CPS calibration gas for these instruments
4-Gas Calibration Gas – Dräger Equivalent – H₂S 25 / CO 100 / CH₄ 50% LEL / O₂ 17%This CPS blend's concentrations differ from the manufacturer's standard cylinder above. It can be used when the instrument's span values are set to this cylinder's concentrations, which fall within the manufacturer's allowed calibration ranges.
MSA
MSA published standard
MSA quad calibration cylinder (58 L): CH4 1.45% / O2 15% / CO 60 ppm / H2S 20 ppm · Cylinder 10045035 (North America) / 10053022 (Europe)
Source: ALTAIR 4XR Operating Manual 10175896, docs.msasafety.com (quad cylinder 10045035 NA / 10053022 EU); ALTAIR 5X PID Operating Manual 10165710, docs.msasafety.com
| Sensor | Calibrates to |
|---|---|
| LEL | Pentane 58% LEL |
| O2 | Oxygen 15% |
| CO | Carbon monoxide 60 ppm |
| H2S | Hydrogen sulfide 20 ppm |
CPS calibration gas for these instruments
4-Gas Calibration Gas – MSA Equivalent – H₂S 20 / CO 60 / Pentane 58% LEL / O₂ 15%Matches the manufacturer's published standard mix above.
RAE Systems
Values per the QRAE 3 User's Guide (M02-4001-000), Standard Span Values table.
RAE Systems published standard
Honeywell RAE four-gas calibration mix P/N 610-0050-007 (34 L): CO 50 ppm / H2S 10 ppm / CH4 50% LEL / O2 18% (balance not stated)
Source: Honeywell support article (MultiRAE standard four-gas mix P/N 610-0050-007), sps-support.honeywell.com
| Sensor | Calibrates to |
|---|---|
| LEL | Methane 50% LEL |
| O2 | Oxygen 18% |
| CO | Carbon monoxide 50 ppm |
| H2S | Hydrogen sulfide 10 ppm |
| SO2 | Sulfur dioxide 5 ppm |
| HCN | Hydrogen cyanide 10 ppm |
| NH3 | Ammonia 50 ppm |
| PH3 | Phosphine 5 ppm |
| Cl2 | Chlorine 10 ppm |
| NO2 | Nitrogen dioxide 5 ppm |
CPS calibration gas for these instruments
4-Gas Calibration Gas – RAE Systems Equivalent – H₂S 10 / CO 50 / CH₄ 50% LEL / O₂ 18%Matches the manufacturer's published standard mix above.
Crowcon
Values are Crowcon's published T4 quad values, from the T4 manual. The Gasman is a single-gas detector — it has no quad mix; its calibration value is stored in the sensor i-module.
Crowcon published standard
Crowcon T4 quad gas (per T4 manual): H2S 15 ppm / CO 100 ppm / O2 18% VOL / CH4 50% LEL (2.2% VOL); balance not named in the manual
Source: T4 User & Operator Manual M070044 Issue 7, crowcon.com
| Sensor | Calibrates to |
|---|---|
| LEL | Methane 50% LEL (2.2% VOL) |
| O2 | Oxygen 18% VOL |
| CO | Carbon monoxide 100 ppm |
| H2S | Hydrogen sulfide 15 ppm |
GMI (Teledyne)
The PS200's factory calibration values are below. Teledyne's Combi Test Gas cylinder 99146 (CH₄ 2.5% / CO 500 ppm / H₂S 50 ppm / O₂ 18%) is a separate higher-concentration accessory — it can only be used after the instrument's stored calibration values are changed to match it.
GMI (Teledyne) published standard
PS200 factory pre-defined calibration values (per PS200 User Manual): 50% LEL / O2 18% / CO 100 ppm / H2S 25 ppm
Source: PS200 User Manual 64171 Rev 14, teledynegasandflamedetection.com
| Sensor | Calibrates to |
|---|---|
| LEL | Methane 50% LEL |
| O2 | Oxygen 18% |
| CO | Carbon monoxide 100 ppm |
| H2S | Hydrogen sulfide 25 ppm |
Gas Clip Technologies
Balance gas is not stated in Gas Clip's MGC manual.
Gas Clip Technologies published standard
Gas Clip quad gas cylinder MGC-Q-58 (58 L) / MGC-Q-116 (116 L): H2S 25 ppm / CO 100 ppm / O2 18% / 50% LEL (2.5% vol methane); balance gas not stated in the manual
Source: Multi Gas Clip Infrared User's Manual UM-MGC V2.15, gascliptech.com
| Sensor | Calibrates to |
|---|---|
| LEL | Methane 50% LEL (2.5% vol) |
| O2 | Oxygen 18% |
| CO | Carbon monoxide 100 ppm |
| H2S | Hydrogen sulfide 25 ppm |
Industrial Scientific
Industrial Scientific hosts no product manuals on indsci.com; values are from the Ventis Pro manual (dealer-hosted copy). Note: the manual's table lists NO2 at 25 ppm while some Industrial Scientific kit lists show 5 ppm NO2 cylinders.
Industrial Scientific published standard
Ventis Pro factory calibration gas values: CO 100 ppm / H2S 25 ppm / O2 20.9% / LEL 50% LEL methane
Source: Ventis Pro Product Manual 17156830-1 Rev 13, Table 2.7 (manufacturer manual; copy hosted by GasTech)
| Sensor | Calibrates to |
|---|---|
| LEL | Methane 50% LEL (pentane 25% LEL) |
| O2 | Oxygen 20.9% |
| CO | Carbon monoxide 100 ppm |
| H2S | Hydrogen sulfide 25 ppm |
| NH3 | Ammonia 50 ppm |
| HCN | Hydrogen cyanide 10 ppm |
| NO2 | Nitrogen dioxide 25 ppm |
| PH3 | Phosphine 1 ppm |
| SO2 | Sulfur dioxide 10 ppm |
| Cl2 | Chlorine 10 ppm |
| CO2 | Carbon dioxide 2.5% vol |
Every Other Sensor
| Sensor | Calibrates to | |
|---|---|---|
| PID (VOC) | Isobutylene 100 ppm | 34L · 34-21-0100 · $74 |
| SO2 | Sulfur dioxide 10 ppm | 34L · FX34-126-010 · $163 |
| NH3 | Ammonia 25 ppm | 34L · FX34-106-025 · $239 |
| Cl2 | Chlorine 10 ppm | 34L · FX34-130-10 · $239 |
| HCN | Hydrogen cyanide 10 ppm | 34L · FX34-108-010 · $254 |
| PH3 | Phosphine 5 ppm | 34L · FX34-124-05 · $244 |
| NO2 | Nitrogen dioxide 10 ppm | 34L · FX34-123-010 · $239 |
| CO2 | Carbon dioxide 5,000 ppm | 34L · 34-08-3300 · $70 |
| IR LEL | Methane 50% LEL | 34L · 34-23-8600 · $70 |
| H2 | Hydrogen 50% LEL | 34L · 34-19-7500 · $70 |
| LEL | Methane 50% LEL | 34L · 34-23-8600 · $70 |
| O2 | Oxygen 20.9% (zero air) — span; Nitrogen 99.999% UHP — zero | |
| CO | ||
| H2S |
Don't see your detector?
We supply calibration gas and service for 30+ brands — or ship us the detector. In-house calibration from $55.