Description
The Ammonia (NH₃) 100 ppm + Oxygen (O₂) 20.9% Calibration Gas is a precision calibration gas mixture designed for accurate calibration, bump testing, and verification of compatible gas detection instruments requiring ammonia and oxygen.
This calibration gas mixture contains 100 ppm Ammonia (NH₃) and 20.9% Oxygen (O₂), with Nitrogen (N₂) balance and is available in 34L, 60L, and 120L cylinders with a C-10 connection.
Manufactured in the USA under an ISO 9001:2015 certified quality management system, this mixture is designed to provide reliable calibration gas for compatible portable and fixed gas detection equipment.
Mixture: 100 ppm Ammonia (NH₃) / 20.9% Oxygen (O₂) / Nitrogen Balance
Cylinder Sizes: 34L, 60L & 120L
Connection: C-10
Shelf Life: 12 Months
Country of Manufacture: USA
Need help confirming the correct calibration gas for your instrument?
Call CPS Calibrations at 865-900-8844 or email info@cpscalibrations.com.
| Target Gases | Ammonia (NH₃) + Oxygen (O₂) |
| Ammonia (NH₃) | 100 ppm |
| Oxygen (O₂) | 20.9% Vol. |
| Balance Gas | Nitrogen (N₂) |
| Available Cylinder Sizes | 34L, 60L and 120L |
| Valve Connection | C-10 |
| Shelf Life | 12 months |
| Quality Management | ISO 9001:2015 |
| Country of Manufacture | USA |
Specifications and cylinder appearance may vary by cylinder size and production lot.
Common Uses: Calibration and bump testing of compatible portable and fixed gas detection instruments requiring 100 ppm ammonia and 20.9% oxygen calibration gas.
Always verify the required calibration gas concentrations and follow the gas detector manufacturer's calibration and bump-test procedures before use.
Hazardous Material Shipping
Calibration gas cylinders are regulated for transportation as hazardous materials and must be shipped in accordance with applicable carrier and hazardous-material regulations. Available shipping methods and charges may vary based on cylinder size, quantity, destination, and applicable HazMat requirements.
Lead Time
Please allow approximately 3 business days for order processing prior to shipment. Lead times may vary depending on availability and order quantity.
Non-Returnable Product
Calibration gas is non-returnable. Because calibration gas is a certified gas mixture with a limited shelf life, cylinders cannot be returned or exchanged after shipment.
Please verify the gas concentrations, balance gas, cylinder size, and connection before placing your order.
Not sure which cylinder you need?
Contact CPS Calibrations before ordering at 865-900-8844 or info@cpscalibrations.com. We can help verify compatibility with your gas detection instrument.
Related Products
Related Products
C-10 Fixed Flow Calibration Gas Regulator – Stainless Steel
Calibration Gas
C-10 Demand Flow Calibration Gas Regulator – Stainless Steel
Calibration Gas