Flir
FLIR TG56-2 Spot IR Thermometer – 30:1 Infrared Thermometer with Type K Thermocouple
- Availability:
- Usually ships in 3 business days
Description
The FLIR TG56-2 Spot IR Thermometer is a 30:1 infrared thermometer for high-temperature industrial work, reading surface temperatures to 2372°F (1300°C) from a safer distance. Choose the standard configuration or the configuration with the pipe clamp probe where offered.
A 30:1 distance-to-spot ratio and single-point laser target small components at range, while the included Type K thermocouple handles contact measurements to 1202°F (650°C). The 1.57-inch color display shows current and reference readings together, with high/low alarms, adjustable emissivity, data logging for 2 × 99 readings, and built-in worklights for dim cabinets and machinery spaces.
- 30:1 distance-to-spot ratio measures smaller targets from a safer distance
- Non-contact IR measurements up to 1300°C (2372°F)
- Type K thermocouple input for contact temperature measurement, with a general-purpose probe included
- Class II single-point laser pinpoints the measurement spot
- Color EBTN display shows the current reading and a reference (min/max/avg/dif) simultaneously
- Stores 99 readings in each of two memory banks (manual and automatic logging)
- Programmable high/low alarms with HI/LO flash alert, LED worklights, and an ergonomic single-hand design
Typical Applications
- Industrial maintenance
- Electrical inspections
- HVAC service
- Process monitoring
| Model | FLIR TG56-2 Spot IR Thermometer |
| Distance to Spot Ratio (D:S) | 30:1 |
| IR Temperature Range | -30°C to 1300°C (-22°F to 2372°F) |
| Basic Accuracy | 0°C to 100°C: ±1.0°C (±1.8°F) |
| Emissivity | 0.01 to 1.00 with 5 presets |
| Display | 1.57 in Color EBTN |
| Laser | Single point laser to upper edge of measurement area |
| Laser Power | ≤1 mW Class II |
| Resolution | 0.1°C/°F |
| Spectral Response | 8–14 µm |
| AVG | Last 20 readings |
| Differential (MAX/MIN) | Yes |
| Type K Input Range | -30°C to 650°C (-22°F to 1202°F) |
| Type K Input Basic Accuracy | ±1°C or 1% (whichever is greater) |
| Included Type K Probe Range | -30°C to 260°C (-22°F to 500°F) |
| Max/Min | Min/Max/Avg/Dif |
| Measurement Resolution | 0.1°C/°F |
| Response Time | 250 ms |
| Memory | 2 × 99 sets |
| Auto Power Off | 5 or 15 seconds, selectable |
| Continuous Run Time | 8 hours max |
| Power | 9V alkaline battery (included) |
| Alarm | High/low programmable |
| Alarm Alert | HI/LO flash on display |
| Data Logging | Manual and automatic |
| Dimensions | 192 × 125 × 64 mm (7.5 × 4.9 × 2.5 in) |
| Weight | 310 g (10.9 oz) |
| Locking System | Yes |
| Scanning Mode | Yes |
| Worklights | Yes |
| Certifications | CE, UKCA, RCM, WEEE, FDA |
| Drop Test | 1 m (3.2 ft) per product page spec table |
| IP Rating | IP20 (per FLIR launch release) |
| Included | Spot IR thermometer, Type K thermocouple probe, 9V battery, Quick Start Guide, and storage pouch (per FLIR TG56-2 product page excerpts) |
Specifications are subject to manufacturer updates. Refer to current FLIR product documentation for complete operating, safety and maintenance requirements.
FLIR Limited Warranty
The FLIR TG56-2 is covered by FLIR's limited 3-year warranty for test and measurement instruments.
Warranty eligibility, registration requirements, exclusions, and coverage are subject to FLIR's complete warranty terms.