Calibration Gas
Hydrogen Cyanide (HCN) 10 ppm + Carbon Monoxide (CO) 50 ppm Calibration Gas – Nitrogen Balance
Description
The CPS Calibrations Hydrogen Cyanide (HCN) 10 ppm + Carbon Monoxide (CO) 50 ppm Calibration Gas – Nitrogen Balance is precisely blended with a nitrogen balance for calibration, verification, and testing of compatible gas detection equipment.
This mixture contains 10 ppm Hydrogen Cyanide (HCN), and 50 ppm Carbon Monoxide (CO), with Nitrogen (N₂) balance.
Available in 34L, 44L, 60L, 66L & 120L cylinders, each cylinder is equipped with a C-10 connection.
Each cylinder includes a QR code for convenient access from a smartphone or other compatible device to the cylinder-specific Safety Data Sheet (SDS) and Certificate of Analysis (COA).
This calibration gas is NIST traceable and produced under quality systems supporting ISO 17034:2016 – Reference Material Production, ISO/IEC 17025:2017 – Chemical Testing, and ISO 9001:2015 – Quality Management.
Hydrogen Cyanide (HCN): 10 ppm
Carbon Monoxide (CO): 50 ppm
Balance Gas: Nitrogen (N₂)
Cylinder Sizes: 34L, 44L, 60L, 66L & 120L
Connection: C-10
Shelf Life: 12 Months
Traceability: NIST Traceable
Documentation: Cylinder-Specific SDS & COA via QR Code
Country of Manufacture: USA
Need help confirming the correct calibration gas for your detector?
Call CPS Calibrations at 865-900-8844 or email info@cpscalibrations.com.
| Hydrogen Cyanide (HCN) | 10 ppm |
| Carbon Monoxide (CO) | 50 ppm |
| Balance Gas | Nitrogen (N₂) |
| Available Cylinder Sizes | 34L, 44L, 60L, 66L & 120L |
| Cylinder Connection | C-10 |
| Shelf Life | 12 Months |
| Traceability | NIST Traceable |
| Reference Material Production | ISO 17034:2016 |
| Chemical Testing | ISO/IEC 17025:2017 |
| Quality Management | ISO 9001:2015 |
| Documentation | Cylinder-Specific SDS & Certificate of Analysis (COA) Accessible via QR Code |
| Country of Manufacture | USA |
Common Uses
- Calibration of compatible hydrogen cyanide gas detectors
- Bump testing and functional verification
- Portable gas detection equipment
- Fixed hydrogen cyanide gas detection systems
- Industrial safety and maintenance programs
Always verify the required calibration gas concentration, regulator, flow rate, and calibration procedure specified by the gas detector manufacturer before use.
Processing Time: Please allow approximately 3 business days for order processing prior to shipment. Lead times may vary depending on availability and order quantity.
Hazardous Material Shipping: Calibration gas cylinders are regulated for transportation as hazardous materials and must be shipped in accordance with applicable carrier and hazardous-material regulations. Available shipping methods and charges may vary based on cylinder size, quantity, destination, and applicable HazMat requirements.
Non-Returnable: Calibration gas cylinders are non-returnable. Please verify the gas concentration, cylinder size, and connection before placing your order.
Related Products
Related Products
Hydrogen Cyanide (HCN) 10 ppm Calibration Gas – Nitrogen Balance
Calibration Gas
Hydrogen Cyanide (HCN) 10 ppm + O₂ 20.9% Calibration Gas – Nitrogen Balance
Calibration Gas
Carbon Monoxide (CO) 100 ppm Calibration Gas – Nitrogen Balance
Calibration Gas
Carbon Monoxide (CO) 50 ppm Calibration Gas – Nitrogen Balance
Calibration Gas
Carbon Monoxide (CO) 1,000 ppm Calibration Gas – Nitrogen Balance
Calibration Gas