Calibration Gas
Nitrogen Dioxide (NO₂) 100 ppm Calibration Gas – Nitrogen Balance
- SKU:
- FX34-123-100
Description
The Nitrogen Dioxide (NO₂) 100 ppm Calibration Gas – Nitrogen Balance is a precision calibration gas mixture designed for accurate calibration, bump testing, and verification of compatible nitrogen dioxide gas detection instruments.
This calibration gas mixture contains 100 ppm Nitrogen Dioxide (NO₂) with Nitrogen (N₂) balance. It is available in 34L, 60L, and 120L cylinders, all equipped with a C-10 connection.
Each cylinder is manufactured in the USA and provides traceable documentation to support your gas detection calibration program. Cylinders include a QR code providing convenient access from a smartphone or other compatible device to the cylinder-specific Safety Data Sheet (SDS) and Certificate of Analysis (COA).
Calibration gas is NIST traceable and produced under quality systems meeting ISO 17034:2016 for Reference Material Production, ISO/IEC 17025:2017 for Chemical Testing, and ISO 9001:2015 Quality Management standards.
Mixture: 100 ppm Nitrogen Dioxide (NO₂) / Nitrogen Balance
Cylinder Sizes: 34L, 60L & 120L
Connection: C-10
Shelf Life: 12 Months
Country of Manufacture: USA
Need help confirming the correct calibration gas or regulator for your instrument?
Call CPS Calibrations at 865-900-8844 or email info@cpscalibrations.com.
| Target Gas | Nitrogen Dioxide (NO₂) |
| NO₂ Concentration | 100 ppm |
| Balance Gas | Nitrogen (N₂) |
| Available Cylinder Sizes | 34L, 60L and 120L |
| Cylinder Connection | C-10 |
| Shelf Life | 12 months |
| Traceability | NIST traceable |
| Reference Material Production | ISO 17034:2016 |
| Chemical Testing | ISO/IEC 17025:2017 |
| Quality Management | ISO 9001:2015 |
| Documentation | Cylinder-specific Certificate of Analysis (COA) and Safety Data Sheet (SDS) access via QR code |
| Country of Manufacture | USA |
Specifications and cylinder appearance may vary by cylinder size and production lot.
Common Uses: Calibration and bump testing of compatible nitrogen dioxide gas detection instruments requiring a 100 ppm NO₂ calibration gas mixture with nitrogen balance.
Always verify the required calibration gas concentration, balance gas, cylinder connection, and flow rate, and follow the gas detector manufacturer's calibration and bump-test procedures before use.
Hazardous Material Shipping
Calibration gas cylinders are regulated for transportation as hazardous materials and must be shipped in accordance with applicable carrier and hazardous-material regulations. Available shipping methods and charges may vary based on cylinder size, quantity, destination, and applicable HazMat requirements.
Lead Time
Please allow approximately 3 business days for order processing prior to shipment. Lead times may vary depending on availability and order quantity.
Non-Returnable Product
Calibration gas is non-returnable. Because calibration gas is a certified gas mixture with a limited shelf life, cylinders cannot be returned or exchanged after shipment.
Please verify the gas concentration, balance gas, cylinder size, and connection before placing your order.
Regulator Compatibility: The 34L, 60L, and 120L cylinders use a C-10 connection. Verify that your regulator is compatible with a C-10 cylinder connection before ordering.
Not sure which cylinder or regulator you need?
Contact CPS Calibrations before ordering at 865-900-8844 or info@cpscalibrations.com. We can help verify compatibility with your gas detection instrument.
Related Products
Related Products
C-10 Fixed Flow Calibration Gas Regulator – Stainless Steel
Calibration Gas
C-10 Demand Flow Calibration Gas Regulator – Stainless Steel
Calibration Gas