Crowcon

Crowcon XgardIQ Sensor Modules

(No reviews yet) Write a Review
SKU:
CROWCON-XIQ-MOD
Availability:
Usually ships in 3 business days
$422.00 - $1,036.00

Sold Out

Frequently bought together:

Description

XgardIQ sensor modules are the plug-in smart sensors for the Crowcon XgardIQ fixed gas detector transmitter. Each module carries its own gas type, range and alarm levels: plug it in and the transmitter's auto-configure function uploads them automatically.

Modules hot-swap in seconds using the tool provided — no hot-work permit — so a pre-calibrated spare module keeps the detection point live while the removed module goes to a safe area for calibration. Pellistor (catalytic), electrochemical and infrared (IR) technologies cover flammable gases, toxic gases and oxygen across the ranges listed. IMPORTANT: this product is the sensor module ONLY — it does not detect gas on its own and requires a Crowcon XgardIQ transmitter (supplied with no module fitted), listed separately and linked below.

Module only — transmitter required: these modules plug into the Crowcon XgardIQ Fixed Gas Detector Transmitter and do not operate on their own. The transmitter is supplied with no module fitted, so every XgardIQ installation needs one transmitter plus one module per point.

Common Applications:
Oil & Gas • Petrochemical • Chemical Plants • Water & Wastewater • Steel • Power Generation • Marine & Offshore

Need help selecting the right configuration? Call CPS Calibrations at (865) 900-8844 — every configuration on this page is a factory Crowcon build, and we calibrate what we sell.

  • Module only — requires a Crowcon XgardIQ transmitter (see link in the Description tab)
  • Hot-swappable in seconds with the tool provided — no hot-work permit or special tools
  • Auto-configure: the transmitter uploads the module's gas type, range, units and alarm levels on plug-in
  • Pre-calibrated spares minimise downtime — swap first, calibrate the removed module in a safe area
  • Pellistor (catalytic) modules for flammable gases, 0-100% LEL
  • Electrochemical modules for toxic gases and oxygen
  • Infrared (IR) modules for flammable gases — poison-resistant and fail-safe
  • Users can set the full-scale range of the sensor via the transmitter display menu to suit the location
  • Smart Bump and Speedy Bump Test support at the transmitter for quick sensor health checks
Gases & Ranges (listed modules) Methane: 0–100% LEL; Propane: 0–100% LEL; Pentane: 0–100% LEL; Hydrogen: 0–100% LEL; Oxygen: 0–25% vol; Carbon monoxide: 0–500 ppm, 0–250 ppm, 0–1000 ppm; Hydrogen sulfide: 0–100 ppm, 0–25 ppm, 0–50 ppm, 0–200 ppm; Sulfur dioxide: 0–10 ppm, 0–100 ppm; Chlorine: 0–20 ppm, 0–5 ppm, 0–10 ppm; Ozone: 0–1 ppm; Ammonia: 0–100 ppm, 0–1000 ppm, 0–50 ppm; Benzene: 0–100% LEL; Heptane: 0–100% LEL; LPG: 0–100% LEL; Acetylene: 0–100% LEL; Ethanol: 0–100% LEL; Hydrogen sulfide (high temperature): 0–100 ppm
Compatibility Crowcon XgardIQ fixed gas detector transmitter ONLY — module does not operate standalone
Module size 66 x 53 x 45 mm (2.6 x 2.1 x 1.8 in) — smart sensor module
Sensor technologies Pellistor (catalytic), electrochemical, infrared (IR) — per configuration
Fitting Plug-in hot-swap using the tool provided; auto-configure on plug-in
Operating temperature Sensor-dependent — see the gas table in the XgardIQ datasheet (Downloads)

Product Documents & Resources

  • XgardIQ Datasheet (PDF)

Document files are being added to this page. Need one now? Email info@cpscalibrations.com and we'll send it straight over.

View AllClose

From the CPS Blog