We Calibrate Brands We Don't Sell

We Calibrate Brands We Don't Sell

CPS Calibrations calibrates brands it does not sell: our bench services gas instruments from MSA, BW/Honeywell, GMI, and Industrial Scientific — brands CPS does not sell or stock — at the same published in-house rates as the brands on our shelves, $55 for a single-gas instrument and $90 for a 4- or 5-gas instrument, with the same full certificate: as-found and as-left readings for every channel the instrument carries, and a Certificate of Analysis link for each calibration gas bottle used. Service coverage is broader than the sales catalog, because your fleet was built by your work, not by our store.

Say the quiet part first, because this post depends on it: CPS does not sell MSA, BW/Honeywell, GMI, or Industrial Scientific instruments. We do not stock them, we do not list them in our store, and we are not a warranty center for them. What we are is a calibration bench — and a bench's job is to make whatever instrument arrives read correctly against documented gas and prove it on paper. Fleets in the real world are mixed: a plant inherits one brand in an acquisition, a department standardized on another a decade ago, a contractor runs three brands across three crews. Telling those owners "we only calibrate what we sell" would make the store's catalog the limit of the service, and that is backwards. The umbrella version of this answer is who can calibrate my gas detector; this post is the honest detail behind it.

The Brands Crews Ask About Most

MSA. Altair-family portables and the rest of the MSA line are some of the most common meters in American industry, and their owners are the ones who most often assume they need an MSA channel to get a documented calibration. They do not — they need a bench that calibrates every channel the meter carries and certifies it properly. BW / Honeywell. BW portables ride in more cabs and confined-space kits than almost anything, and they come to our bench the same way: calibration service only, full certificate, no implication that CPS is a BW dealer — we are not. GMI. Less common in some regions, well established in others, and exactly the kind of fleet that gets stranded when a local provider closes — the bench does not care that the badge is less familiar. Industrial Scientific. Another fleet staple whose owners ask the same question and get the same answer. In every case the framing is identical: these are brands we service, not brands we sell — and if you call 865-900-8844 about a specific model, that is the spirit the answer comes in.

What "We Don't Sell It" Does and Does Not Mean

It means three things, plainly. First, calibration is fully on the table. Your MSA, BW/Honeywell, GMI, or Industrial Scientific instrument gets the complete bench service: checked in against its serial number, as-found readings recorded before adjustment, every channel it carries calibrated against documented gas, and a certificate showing as-found and as-left data with a clickable Certificate of Analysis link for each calibration gas bottle used — the link stored from the supplier QR code scanned when that bottle entered service at CPS. One certificate tier, the same standard, whatever the badge. Second, the record follows the instrument. The meter joins the CPS Calibration Program — history by serial number behind one fleet history link with per-location views, due-date reminder emails before the next calibration — with no contract and no monthly fee. A mixed fleet gets one record system instead of one per brand. Third, the limits are honest. We do not sell parts for these brands as a catalog line, and we do not perform their manufacturers' warranty service. If a meter needs work beyond calibration, it is quoted in writing before anything is done — and if that work needs parts we cannot source or documentation our bench cannot stand behind, we tell you that before you ship or before work begins, and the meter comes back with its as-found record. What we will never do is imply a stocking or factory relationship we do not have to win a calibration.

Why Fleets End Up Mixed — and Why One Bench Helps

Almost nobody chooses a mixed fleet on purpose. It accumulates: the meter bought on a predecessor's contract, the units that came with an acquired site, the brand a big customer required on their jobs, the model that was on the shelf the week three meters died. Each badge then drags its own service channel, its own certificate format, and its own due-date system behind it — which is how fleets end up with four record systems and no single answer to "show me every meter's current calibration." One bench for the whole fleet fixes the record problem even when the badges stay mixed: every instrument calibrated the same way, certified the same way, and filed behind one fleet history link, with reminders driven by each meter's own due date. The shipping mechanics for getting them here are in how mail-in gas detector calibration works — the process does not change with the logo on the case.

Frequently Asked Questions

Can CPS calibrate my MSA gas detector?

Yes — as a service. CPS does not sell or stock MSA instruments and is not an MSA warranty center, but our bench calibrates MSA gas detectors: every channel the meter carries, as-found readings recorded before adjustment, and a full certificate with as-found and as-left data and a Certificate of Analysis link for each calibration gas bottle used. The in-house rate is the published one — $55 for a single-gas instrument, $90 for a 4- or 5-gas instrument. Call 865-900-8844 to confirm your specific model before you ship it.

Can CPS calibrate BW or Honeywell gas detectors?

Yes, on the same terms. BW/Honeywell instruments are serviced on our bench — calibrated channel by channel with the full CPS certificate — even though CPS does not sell or stock the brand and offers no BW/Honeywell warranty service. The published in-house rates apply: $55 single-gas, $90 for a 4- or 5-gas instrument, with shipping separate and return shipping the customer's cost. Confirm your model with a quick call to 865-900-8844 before it ships.

Can CPS calibrate Industrial Scientific or GMI instruments?

Yes — both are part of the service coverage that is broader than our sales catalog. Industrial Scientific and GMI meters are calibrated on the bench, checked in against serial number, and returned with the same certificate standard as any brand we sell: as-found and as-left data for every channel, plus the calibration gas's CoA trail. CPS does not sell either brand. As with any model, a one-minute call first — 865-900-8844 — confirms the bench covers your exact instrument before you spend money on shipping.

How much does it cost to calibrate a brand CPS doesn't sell?

The same as a brand we do sell — the rate follows the instrument, not the badge. Published in-house rates: $55 for a single-gas instrument and $90 for a 4- or 5-gas instrument, for calibration performed at our bench in Rockwood, Tennessee. Those are in-house rates only and never apply to on-site work, which is quoted in writing. Shipping is separate in both directions, with return shipping the customer's cost. Work beyond calibration, if a meter needs it, is quoted in writing before it is done.

Does the certificate for a brand you don't sell meet the same standard?

It is the same certificate — CPS issues one tier only. It shows the as-found readings recorded when the instrument arrived and the as-left readings after calibration, for every channel the instrument carries, and it carries a clickable Certificate of Analysis link for each calibration gas bottle used on it, the link stored from the supplier QR code scanned when the bottle entered service. The instrument's record is kept by serial number in the CPS Calibration Program, with due-date reminders, exactly as it is for brands we stock.

Can I send a mixed fleet — several brands in one shipment?

Yes, and that is one of the main reasons this service exists. Ship the fleet together or in rotations; every instrument is checked in against its own serial number, calibrated channel by channel, and returned with its own certificate, while the whole fleet's history collects behind one fleet history link with per-location views. One bench and one record system for a fleet that accumulated four badges over ten years is the point — the paperwork stops depending on which logo is on which case.

If my MSA or BW meter needs a sensor or repair, can CPS do it?

Sometimes — and you will know before any money moves. Work beyond calibration is always quoted in writing before it is done. Honest boundaries: CPS does not sell parts for MSA, BW/Honeywell, GMI, or Industrial Scientific as a catalog line and does not perform those manufacturers' warranty service. If a repair needs parts we cannot source or work our bench cannot document properly, we say so up front, and the instrument is returned as-is with its as-found record — a dated, factual basis for your repair-or-replace decision — rather than a promise we cannot keep.

Why would a company calibrate brands it doesn't sell?

Because calibration is a bench discipline, not a sales channel. The skill is making an instrument read correctly against documented gas and proving it with as-found and as-left data and a traceable gas record — and that discipline applies to the meter that arrives, whatever its badge. Fleets are mixed because work is mixed; a service that only covers one store's catalog leaves most real fleets partially served. CPS's stocking list answers "what can I buy here?" — the bench answers a different question: "what can be calibrated here, properly, with the paperwork to prove it?"

How do I check whether CPS can calibrate my specific model?

Call 865-900-8844 with the make and model. Service coverage is broader than the sales catalog, so do not rule your instrument out because you cannot find it in our store — the store is the wrong list to check. The call takes a minute, confirms the model and the in-house rate, and confirms the current bench turnaround before you ship. If an instrument is genuinely outside what our bench can document properly, we will tell you on that call, before you spend anything on freight.

Who pays for shipping, and how long will my meter be gone?

Shipping is the customer's cost in both directions: you ship the instrument to CPS Calibrations, 109 S. Front Street, Rockwood, TN 37854, and return shipping is arranged when the service is booked. The published $55 and $90 rates are the in-house calibration service itself. Turnaround is confirmed when you book — it depends on the current bench queue and on what the instrument needs, and a meter waiting on your written approval of a repair quote waits on that decision. We give you the real figure on the phone rather than publishing one we cannot keep for every meter.

The Bottom Line

A calibration bench should be judged by its gas, its data, and its paperwork — not by whether it sold you the meter. CPS Calibrations services MSA, BW/Honeywell, GMI, and Industrial Scientific instruments it does not sell, at published in-house rates — $55 single-gas, $90 for 4- and 5-gas — with as-found and as-left data, the calibration gas's CoA trail, and one record that follows every meter in a mixed fleet. We will not pretend to stock those brands; we will calibrate them properly.

Running a brand we don't sell? Call CPS Calibrations at 865-900-8844 to confirm your model, then ship it to 109 S. Front Street, Rockwood, TN 37854.


CPS Calibrations · 109 S. Front Street, Rockwood, TN 37854 · Who Can Calibrate My Gas Detector? · How Mail-In Gas Detector Calibration Works · Calibration Services

Ready to mail yours in?

Start the ship-in request, pack the meter, and we handle the rest — every channel calibrated as configured, full certificate returned with it.

Start Your Ship-In Request

or call 865-900-8844

Oct 29th 2026 Derek Farmer

Recent Posts